Phone: (216) 577-7171 | Email: [email protected]

FREE SHIPPING $199 AND OVER 

FREE SHIPPING $199 AND OVER 

lc
free shipping
pmg
lc
free shipping
pmg

TTE | Turbocharger Upgrade 2.0 TSI IS38 MQB

TTE | Turbocharger Upgrade 2.0 TSI IS38 MQB

TTE Turbochargers offer upgrades to your vehicles factory turbos, greatly increasing vehicle performance all while maintaining OEM fitment and reliability. Please choose the upgrade options you wish to select below. If you choose  to send in your OEM turbocharger for upgrades, we will send you an email regarding shipping details.

$766.98$3,547.76

In stock (Message)

Description

TTE IS38Race IHI Turbocharger

Many of our customers have been asking for a motorsport IS38 turbocharger, Well here it is!

TTE IS38Race Turbocharger is based on the Original Genuine IHI IS38 turbocharger for the EA888.3 2.0TSI VAG Engine, not a cheap aftermarket clone IS38 turbo that are available from others and not disclosed.

A TTE IS38Race has a TTE upgrade performance bearing pack and motorsport balanced TTE core using the IHI Bearing housing and IHI IS38 turbine and Genuine IHI IS38 compressor wheel giving a reliable performance at higher boost levels as used on Stage 1 & 2 software calibrations from all software providers.  We also include our TTE CNC silencer delete, removing the original baffle internals and fitting a new billet straight through section to improve the flow and enhance the sound.

This is a direct swap from a standard IS38 so no remap or special calibration required vs standard is38 software.  

Precisely balancing the IS38Race turbocharger is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts balance machine, then components are assembled and then the CHRA is dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. A balance report document is supplied with your TTE IS38Race for your reassurance.

Product Highlights:

  • Original IS38 Genuine IHI turbocharger as the base part
  • Original Genuine actuator (TTE calibrated)
  • Original Genuine diverter valve
  • Original Genuine IHI Boost silencer
  • Original Genuine IHI IS38 compressor
  • Original Genuine IHI IS38 turbine
  • TTE Upgrade Reinforced bearing pack
  • TTE Silencer delete 
  • Plug and Play installation as IS38 turbocharger
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Perfect choice for stock software or all IS38 2.0 TSI ECU stage 1 or 2 & 2+ calibrations (APR, BEVO, DVX, JDE, UNITRONIC, MRC, REVO, REVLIMIT, ETUNER, & Many More)
  • Proven TheTurboEngineers quality
  • 1 YEAR TTE TROUBLE-FREE WARRANTY
  • Made in Germany

IF SENDING A TURBOCHARGER BE SURE TO CHECK IS AN OEM GENUINE IHI IS38

VAG 2.0 /1.8 EA888.3 TSI MQB TTE475 UPGRADE TURBOCHARGER 

The TTE475 for the MQB 2.0L displacement motor, our evolution from the popular TTE470, sharing the same proven compressor and turbine, just now with the original recirc function. Still keeping the original turbocharger turbine but clipping the original blades for greater flow and to lower exhaust gas temperatures.  We fit a bigger 6+6 blade milled billet compressor so producing extra power but focused on like OEM IS38 response

We also fit our TTE CNC silencer delete. Modifying the turbo discharge silencer, removing the original baffle internals and fitting a new straight through the section, removing any restriction and its function as a noise canceling device, and so improving the flow and enhancing the sound.

We also replace the original thrust bearing for TTE upgrade 360 deg that is made in-house.

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with serial numbered balance test result document.

IF SENDING A TURBOCHARGER BE SURE TO CHECK IS AN OEM GENUINE IHI IS38

Product Highlights:

  • Original Genuine IS38 IHI turbocharger as the base part
  • Original Genuine actuator
  • Original Genuine Diverter
  • Very Early Response & Spool
  • TTE Billet Milled compressor 6+6 Blade 53MM
  • TTE Upgrade bearing pack
  • IHI Stock Turbine clipped for more flow
  • TTE CNC milled OEM silencer delete
  • Plug and Play installation as IS38 turbocharger
  • 475 PS Capable
  • Proven TheTurboEngineers quality
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Software recalibration is required
  • 1 YEAR TTE TROUBLE-FREE WARRANTY
  • Made in Germany

Actuator Selection: Please note on certain generations of cars there was a turbocharger actuator revision please select your correct type.

VAG 2.0 / 1.8TSI EA888.3 MQB TTE535 UPGRADE TURBOCHARGER 

 

TTE535 hybrid performance upgrade turbocharger based on the Original IS38 turbocharger for the 3rd generation VAG 2.0TSI following on from our TTE525R upgrade stage. Stage 3+ power, with great spool and response. We feel this is the best balanced performing hybrid IS38 available on offer.

Engineered & Enhanced  EA888 Gen 3 – IS38

To construct a TTE535 we change the original compressor and employ a far larger and more efficient billet wheel with extended tip technology and mill the compressor cover to optimum gap to match the new compressor profile. We replace the original IS38 turbine and CNC mill the turbine housing to install a larger lightweight 9 blade turbine for greater gas flow.  We also replace the original thrust bearing for TTE upgrade 360 deg that is made in-house.

We also fit our TTE CNC silencer delete. Modifying the turbo discharge silencer, removing the original baffle internals and fitting a new straight through section, removing any restriction and its function as a noise canceling device, and so improving the flow and enhancing the sound.

The 9 Blade TTE turbine is a special turbine designed by TheTurboEngineers.  Advantages are greater gas flow, reducing back pressure and lowering exhaust gas temperatures, allowing safer higher boost levels. This turbine is extremely light in mass so giving a reduced moment of inertia, meaning fast spool up for the size.

 

Equilibrium


Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

Click this link for many dyno results: RESULTS & DYNO’S 

Product Highlights:

  • Original Genuine IS38 IHI turbocharger as the base part
  • Original Genuine actuator
  • Original Genuine diverter valve
  • TTE Billet Milled compressor 6+6 Blade 53mm Inlet
  • TTE High-Flow Low- Mass 9 Blade Turbine 53mm Outlet
  • TTE CNC milled OEM silencer delete
  • TTE Reinforced upgrade bearing pack
  • Plug and Play installation as IS38 turbocharger
  • Software recalibration is required
  • 535 PS+ proven at 2.0 bar 99ron
  • Proven TheTurboEngineers quality
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • 1 YEAR TTE TROUBLE-FREE WARRANTY
  • Made in Germany

Actuator Selection: Please note on certain generations of cars there was a turbocharger actuator revision please select your correct type.

VAG 2.0 / 1.8TSI EA888.3 MQB TTE555 UPGRADE TURBOCHARGER 

TTE555 is our very latest hybrid performance upgrade turbocharger based on the Original IHI IS38 turbocharger for the 3rd generation VAG 2.0TSI. Stage 3+ power, with good spool and response. We feel this is the strongest performing hybrid IS38 available on offer.

Engineered & Enhanced  EA888 Gen 3 – IS38

To construct a TTE555 we change the original compressor and employ a far larger and more efficient billet wheel with extended tip technology and mill the compressor cover to the optimum gap to match the new compressor profile. We replace the original IS38 turbine and CNC mill the turbine housing to install a larger lightweight 9 blade turbine for greater gas flow.  We also replace the original thrust bearing for TTE upgrade 360 deg that is made in-house.

We also fit our TTE CNC Billet silencer delete, removing any restriction and its function as a noise-canceling device, and so improving the flow & response and enhancing the sound.

The 9 Blade TTE turbine is a special turbine designed by TheTurboEngineers.  Advantages are greater gas flow, reducing back pressure and lowering exhaust gas temperatures, allowing safer higher boost levels. This turbine is extremely light in mass so giving a reduced moment of inertia, meaning fast spool up for the size.

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled, and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

Product Highlights:

  • Original Genuine IS38 IHI turbocharger as the base part
  • Original Genuine actuator
  • Original Genuine diverter valve
  • TTE Billet Milled compressor 7+7 Blade 55mm Inlet
  • TTE High-Flow Low- Mass 9 Blade Turbine 53mm Outlet
  • TTE CNC Billet silencer delete
  • Reinforced bearing pack
  • Plug and Play installation as IS38 turbocharger
  • 580PS+ proven
  • Proven TheTurboEngineers Quality
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Software recalibration is required
  • 1 YEAR TTE TROUBLE-FREE WARRANTY
  • Made in Germany

Actuator Selection: Please note on certain generations of cars there was a turbocharger actuator revision please select your correct type.

Additional information

Turbocharger Upgrade

TTE IS38 Race Turbo, TTE475, TTE535, TTE555

Upgrade Option

Brand New Turbocharger, Upgrade OEM Turbo (Send to TTE)

Actuator Option

Type 1 (Square Actuator), Type 2 (Rounded Actuator)

Brand

TTE

Reviews

There are no reviews yet.

Be the first to review “TTE | Turbocharger Upgrade 2.0 TSI IS38 MQB”