{"product_id":"0a5-141-671-f-genuine-vw-audi-clutch-slave-cylinder-and-release-bearing","title":"0A5-141-671-F Genuine VW\/Audi Clutch Slave Cylinder and Release Bearing","description":"\u003cp\u003eGenuine VW\/Audi 0A5-141-671-F is a hydraulic clutch slave-cylinder assembly with an integrated release bearing. At the matching factory release arrangement, hydraulic pressure from the clutch master cylinder operates the slave assembly, and the release bearing acts on the pressure plate to disengage the clutch.\u003c\/p\u003e\u003ch3\u003eTechnical details and what is included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFactory part number: 0A5-141-671-F \/ 0A5141671F.\u003c\/li\u003e\n\u003cli\u003eAssembly type: hydraulic clutch slave cylinder with integrated release bearing.\u003c\/li\u003e\n\u003cli\u003eApplication: matching transverse six-speed manual clutch release arrangements identified below.\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: one slave-cylinder\/release-bearing assembly.\u003c\/li\u003e\n\u003cli\u003eClutch, flywheel, master cylinder, hydraulic line, fluid and separately specified mounting parts are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConfirm the gearbox code, original mounting profile, hydraulic connection and clutch release geometry before ordering. This is not a universal bearing for every six-speed gearbox. Modified clutch systems must explicitly specify compatibility with this original release arrangement. DSG and other automatic transmissions do not use this manual-clutch assembly.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA diagnosed leak is traced to the slave-cylinder assembly.\u003c\/li\u003e\n\u003cli\u003eInspection identifies damage or wear at the release bearing.\u003c\/li\u003e\n\u003cli\u003eA diagnosed clutch-release fault requires renewal of the slave or bearing.\u003c\/li\u003e\n\u003cli\u003eThe original assembly is damaged, or the prescribed clutch service calls for its replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eClutch pedal, release and noise symptoms can also result from the master cylinder, hydraulic line, clutch, flywheel or other components. Diagnose the actual fault before selecting parts. Replacing this assembly alone does not correct a worn clutch disc, damaged pressure plate or separate hydraulic leak.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eThe table identifies confirmed compatible six-speed manual configurations. Verify the original gearbox and release-system arrangement; automatic and five-speed versions of the same model are excluded.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi TT\u003c\/td\u003e\n\u003ctd\u003e2001–2006\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline inline-four; 225 hp\u003c\/td\u003e\n\u003ctd\u003e8N coupe or roadster; quattro; 02M six-speed manual only\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A3\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L TFSI gasoline inline-four\u003c\/td\u003e\n\u003ctd\u003e8P Sportback; front-wheel drive; 02Q six-speed manual only\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e2.8L 24-valve gasoline VR6\u003c\/td\u003e\n\u003ctd\u003eMk4 hatchback; front-wheel drive; 02M six-speed manual only\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2002–2003\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline inline-four\u003c\/td\u003e\n\u003ctd\u003eMk4 hatchback; 337 (2002) or 20th Anniversary (2003); front-wheel drive; 02M six-speed manual only; five-speed models excluded\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta GLI\u003c\/td\u003e\n\u003ctd\u003e2002–2004\u003c\/td\u003e\n\u003ctd\u003e2.8L 24-valve gasoline VR6\u003c\/td\u003e\n\u003ctd\u003eMk4 sedan; front-wheel drive; 02M six-speed manual only\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta GLI\u003c\/td\u003e\n\u003ctd\u003e2004–2005\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline inline-four\u003c\/td\u003e\n\u003ctd\u003eMk4 sedan; front-wheel drive; early 2005 Mk4 body only; 02M six-speed manual only\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen R32\u003c\/td\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003ctd\u003e3.2L gasoline VR6\u003c\/td\u003e\n\u003ctd\u003eMk4 hatchback; 4Motion; 02M six-speed manual only\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2006–2014\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged gasoline inline-four; FSI\/TSI as originally fitted\u003c\/td\u003e\n\u003ctd\u003eMk5\/Mk6 hatchback; front-wheel drive; 02Q six-speed manual only\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta GLI\u003c\/td\u003e\n\u003ctd\u003e2006–2009; 2012–2018\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged gasoline inline-four; FSI\/TSI as originally fitted\u003c\/td\u003e\n\u003ctd\u003eMk5\/Mk6 sedan; front-wheel drive; 02Q six-speed manual only\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Golf R\u003c\/td\u003e\n\u003ctd\u003e2012–2013\u003c\/td\u003e\n\u003ctd\u003e2.0L TFSI gasoline inline-four\u003c\/td\u003e\n\u003ctd\u003eMk6 hatchback; 4Motion; Six-speed manual only; matching factory release-system geometry\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen CC\u003c\/td\u003e\n\u003ctd\u003e2009–2011\u003c\/td\u003e\n\u003ctd\u003e2.0L TSI gasoline inline-four\u003c\/td\u003e\n\u003ctd\u003eSedan; front-wheel drive; Six-speed manual only; matching 02Q release system\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Tiguan\u003c\/td\u003e\n\u003ctd\u003e2009–2011\u003c\/td\u003e\n\u003ctd\u003e2.0L TSI gasoline inline-four\u003c\/td\u003e\n\u003ctd\u003e5N SUV; front-wheel drive; Six-speed manual only; matching 02Q release system\u003c\/td\u003e\n\u003ctd\u003eMatching factory 02M\/02Q-style hydraulic clutch release arrangement assigned or explicitly compatible with 0A5141671F. Confirm gearbox code, original bearing\/slave mounting and hydraulic inlet profile, and clutch release geometry. DSG, Tiptronic, conventional automatic and five-speed manual applications are excluded. Aftermarket clutches must explicitly accept this original release arrangement. One slave-cylinder\/release-bearing assembly supplied; clutch, flywheel, master cylinder, hydraulic line and fluid are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation and service guidance\u003c\/h3\u003e\u003cp\u003eFollow the factory transmission and clutch-release service procedure for the exact gearbox. Support the vehicle and drivetrain using the prescribed equipment. Inspect the clutch, flywheel, hydraulic connection and mounting surfaces while the assembly is accessible.\u003c\/p\u003e\u003cp\u003eFit the slave-cylinder\/release-bearing assembly using the prescribed original mounting and hydraulic connection procedure. Renew separately specified seals or single-use hardware where required. Follow the factory handling instructions for the concentric slave cylinder; do not operate the release system while dismantled unless the service procedure specifically permits it.\u003c\/p\u003e\u003cp\u003eUse the specified hydraulic fluid and the factory bleeding procedure, then check the serviced connection for leaks and verify clutch operation. Complete the prescribed gearbox and clutch functional checks after reassembly. Consult the exact vehicle and gearbox repair information for tightening values and assembly steps.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48033597718705,"sku":"0A5-141-671-F","price":69.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/0a5-141-671-f-genuine-vw-audi-1.jpg?v=1791985410","url":"https:\/\/hstuning.com\/products\/0a5-141-671-f-genuine-vw-audi-clutch-slave-cylinder-and-release-bearing","provider":"HS Tuning ","version":"1.0","type":"link"}