{"product_id":"4s0-615-437-b-genuine-vw-audi-front-right-ceramic-brake-pad-wear-sensor","title":"4S0-615-437-B Genuine VW\/Audi Front Right Ceramic Brake Pad Wear Sensor","description":"\u003ch2\u003eWear monitoring for the matching ceramic brake pads\u003c\/h2\u003e\u003cp\u003eGenuine VW\/Audi 4S0-615-437-B provides the wear contact for the designated ceramic brake pad installation. Its lead and connector link the pad-mounted contact to the vehicle's wear-monitoring circuit.\u003c\/p\u003e\u003cp\u003eThe sensor must match the brake equipment, installation side and original cable route. The B and D versions are separate references, and the sensor specified for an iron-rotor brake installation may differ.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete factory number: 4S0-615-437-B.\u003c\/li\u003e\n\u003cli\u003eFactory specification: ceramic brake pad wear sensor, factory number 4S0-615-437-B.\u003c\/li\u003e\n\u003cli\u003eDesign: pad contact with an insulated lead, protective covering and vehicle-side connector.\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: one individual brake pad wear sensor; brake pads, clips, caliper and rotor are separate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSensor position can vary with the brake assembly and production revision. Compare the full original number, contact shape and routing before installation. A sensor is a monitoring component and does not measure remaining pad thickness continuously or replace physical brake inspection.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe wear contact has been consumed by pad wear.\u003c\/li\u003e\n\u003cli\u003eThe contact, lead or connector is damaged during brake service.\u003c\/li\u003e\n\u003cli\u003eCircuit testing confirms an open or intermittent fault in the sensor assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspect pad thickness and condition on both sides of the axle and check the wiring connection. A warning can also result from a damaged vehicle harness, so verify the circuit rather than replacing the sensor solely to clear a warning.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eUse the ceramic-brake restriction and assigned sensor position below. Confirm the original B suffix and production arrangement before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eAudi R8\u003c\/td\u003e\n\u003ctd\u003e2017–2023\u003c\/td\u003e\n\u003ctd\u003e5.2L V10 gasoline\u003c\/td\u003e\n\u003ctd\u003eCoupe \/ Spyder, matching ceramic brake equipment\u003c\/td\u003e\n\u003ctd\u003eFront\/right assigned sensor position with ceramic composite brakes; confirm B suffix and original sensor routing, including production split.\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation guidance\u003c\/h3\u003e\u003cp\u003eFollow the factory ceramic-brake pad service procedure. Seat the contact correctly and route the lead through all specified guides, leaving appropriate movement clearance without allowing contact with the rotating disc or wheel.\u003c\/p\u003e\u003cp\u003eConnect the sensor securely, check the lead throughout steering and suspension movement where applicable and complete the required brake warning-system checks. Inspect the brake assembly before returning the vehicle to service.\u003c\/p\u003e\u003ch3\u003eOrdering information\u003c\/h3\u003e\u003cp\u003eOne individual Genuine VW\/Audi 4S0-615-437-B sensor is supplied. Match the original sensor number and order any other side or position separately.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48048413737137,"sku":"4S0-615-437-B","price":125.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/4s0-615-437-b-genuine-vw-audi-1.jpg?v=1792149352","url":"https:\/\/hstuning.com\/products\/4s0-615-437-b-genuine-vw-audi-front-right-ceramic-brake-pad-wear-sensor","provider":"HS Tuning ","version":"1.0","type":"link"}