{"product_id":"7e0-498-203-genuine-vw-audi-outer-cv-joint-boot-kit","title":"7E0-498-203 Genuine VW\/Audi Outer CV Joint Boot Kit","description":"\u003ch2\u003eRestore the protective seal around the outer CV joint\u003c\/h2\u003e\u003cp\u003eThe Genuine VW\/Audi 7E0-498-203 outer CV joint boot kit renews the flexible enclosure that retains joint grease and keeps water, grit and road debris out of the wheel-end constant-velocity joint. A sound boot allows the joint to articulate as the wheels steer and the suspension moves without exposing its working surfaces to contamination.\u003c\/p\u003e\u003cp\u003eThis is a boot service kit for the original applications listed below. It is useful when a damaged boot is discovered before the joint has developed significant wear. It does not replace the joint, axle shaft or wheel bearing, and a new boot cannot correct an already worn or contaminated joint.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete factory number: 7E0-498-203.\u003c\/li\u003e\n\u003cli\u003eFactory specification: original 7E0-498-203 boot kit for the assigned front outer CV joint.\u003c\/li\u003e\n\u003cli\u003eDesign: flexible convoluted boot with separate large and small securing clamps and accompanying service hardware.\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: one individual CV joint boot service kit; the archive photo shows the boot, two clamps, retaining clip, nut, protective cap and one G 052 738 A4 grease tube marked 140 g.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe 140 g marking identifies the photographed grease tube content; it is not a product shipping weight or an instruction to put the entire tube into every joint. Grease quantity, distribution and replacement fastener requirements must follow the repair procedure for the exact axle. Check the original kit number and supplied components rather than selecting by appearance or by the number of folds in the boot.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA split, punctured or weather-cracked boot is allowing grease to escape onto the wheel, suspension or surrounding underbody.\u003c\/li\u003e\n\u003cli\u003eA damaged or loose boot clamp no longer seals the boot securely at the joint or shaft.\u003c\/li\u003e\n\u003cli\u003eThe boot has been damaged during another axle repair and the joint remains serviceable after inspection.\u003c\/li\u003e\n\u003cli\u003eAn intact joint is being serviced and its boot or specified single-use attachment hardware must be renewed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspect the joint before deciding on a boot-only repair. Clicking while turning under load, excessive play, rough movement or gritty lubricant can indicate damage that requires further repair. Clean the joint as directed, examine its working surfaces and confirm that water or road debris has not caused corrosion or accelerated wear.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eThe following applications are confirmed for this exact original kit number. Production dates are essential: a 2012 model may require a later kit. On the A8 applications shown, the dealer assignment is the right outer joint; this table does not authorize use on the opposite side. Confirm the vehicle identification number, original axle configuration and boot-kit number before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A6\u003c\/td\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003e2.0L turbo gasoline\u003c\/td\u003e\n\u003ctd\u003ePremium Plus sedan; front-wheel drive\u003c\/td\u003e\n\u003ctd\u003eFront outer CV joint boot; production through November 14, 2011. Match original axle and complete boot-kit number.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A8 Quattro\u003c\/td\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003e4.2L V8 gasoline\u003c\/td\u003e\n\u003ctd\u003eL sedan\u003c\/td\u003e\n\u003ctd\u003eFront right outer CV joint boot; production through November 11, 2011. Match original axle and complete boot-kit number.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A8 Quattro\u003c\/td\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003e6.3L W12 gasoline\u003c\/td\u003e\n\u003ctd\u003eL W12 sedan\u003c\/td\u003e\n\u003ctd\u003eFront right outer CV joint boot; production through November 11, 2011. Match original axle and complete boot-kit number.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation guidance\u003c\/h3\u003e\u003cp\u003eSupport the vehicle securely and follow the factory axle removal and joint service procedure. Keep the joint and all sealing surfaces clean. Use the specified grease type and amount, seat the boot in its intended grooves without twisting it, and set its installed position and internal air balance as directed before securing the clamps with the appropriate tool.\u003c\/p\u003e\u003cp\u003eInstall retaining hardware and axle fasteners according to the exact repair instructions, renewing any single-use items required by that procedure. Do not guess clamp compression or axle-nut torque. After assembly, check boot seating and clearance throughout steering and suspension movement and inspect for escaping grease.\u003c\/p\u003e\u003ch3\u003eOrdering information\u003c\/h3\u003e\u003cp\u003eOrder one kit for one assigned outer CV joint. This listing uses the complete original number 7E0-498-203. Later suffix versions and revised replacement sets must be checked separately for their contents and application. The photographs show the archived kit and are repeated to provide seven image entries; use the fitment table and original part identification to select the correct application.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48048503423153,"sku":"7E0-498-203","price":80.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/7e0-498-203-genuine-vw-audi-1.jpg?v=1792151762","url":"https:\/\/hstuning.com\/products\/7e0-498-203-genuine-vw-audi-outer-cv-joint-boot-kit","provider":"HS Tuning ","version":"1.0","type":"link"}