{"product_id":"803-407-357-genuine-vw-audi-drive-shaft-bolt-backing-plate","title":"803-407-357 Genuine VW\/Audi Drive Shaft Bolt Backing Plate","description":"\u003ch2\u003eGenuine VW\/Audi drive shaft bolt backing plate\u003c\/h2\u003e\u003cp\u003e803-407-357 is the individual two-hole backing plate, also cataloged as a spacer, used beneath the assigned drive-shaft flange fastening bolts. The confirmed applications below identify the original quattro propeller\/cardan-shaft attachment arrangement.\u003c\/p\u003e\u003cp\u003eThe plate provides the prescribed bearing interface beneath the bolt heads at the matching joint. This listing supplies one plate, with the bolts, seals and shaft components selected separately.\u003c\/p\u003e\u003ch3\u003eTechnical details and supplied quantity\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 803-407-357; compact reference 803407357.\u003c\/li\u003e\n\u003cli\u003eBrand: Genuine VW\/Audi.\u003c\/li\u003e\n\u003cli\u003eComponent: drive-shaft flange bolt backing plate \/ spacer.\u003c\/li\u003e\n\u003cli\u003eConfiguration: two bolt holes in the original curved plate profile.\u003c\/li\u003e\n\u003cli\u003eQuantity: one individual plate per purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe original six-bolt end arrangements commonly use three plates at each end. Check the exact assembly and the scope of the repair before ordering a quantity. Do not replace a specified backing plate with ordinary individual washers or assume that a different shaft flange uses the same hardware.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plate is missing during a flange or shaft repair.\u003c\/li\u003e\n\u003cli\u003eThe original plate is bent or has damaged bolt-bearing surfaces.\u003c\/li\u003e\n\u003cli\u003eA bolt hole or plate profile is damaged.\u003c\/li\u003e\n\u003cli\u003eCorrosion or other deterioration prevents reuse under the applicable service procedure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspect the bolts, joint face and receiving flange as well. A damaged flange, incorrect bolt or defective joint requires its own repair. The backing plate does not replace a shaft seal or correct a driveline vibration caused by another component.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eFitment requires the original quattro propeller-shaft flange arrangement assigned 803407357. Confirm the installed shaft and joint hardware before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4\u003c\/td\u003e\n\u003ctd\u003e1997–2001\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline I4\u003c\/td\u003e\n\u003ctd\u003eB5 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4\u003c\/td\u003e\n\u003ctd\u003e1996–2001\u003c\/td\u003e\n\u003ctd\u003e2.8L gasoline V6; original 12-valve or 30-valve engine by model year\u003c\/td\u003e\n\u003ctd\u003eB5 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4 Avant\u003c\/td\u003e\n\u003ctd\u003e1998–2001\u003c\/td\u003e\n\u003ctd\u003e2.8L gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB5 Wagon; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4 Avant\u003c\/td\u003e\n\u003ctd\u003e1999–2001\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline I4\u003c\/td\u003e\n\u003ctd\u003eB5 Wagon; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S4\u003c\/td\u003e\n\u003ctd\u003e2000–2002\u003c\/td\u003e\n\u003ctd\u003e2.7L twin-turbocharged gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB5 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S4 Avant\u003c\/td\u003e\n\u003ctd\u003e2001–2002\u003c\/td\u003e\n\u003ctd\u003e2.7L twin-turbocharged gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB5 Wagon; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline I4 or 3.0L gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB6 Sedan; quattro; 2005 early body only, through 8E-5-400000; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4 Avant\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline I4 or 3.0L gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB6 Wagon; quattro; 2005 early body only, through 8E-5-400000; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S4\u003c\/td\u003e\n\u003ctd\u003e2004–2005\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003eB6 Sedan or Avant; quattro; 2005 early body only, through 8E-5-400000; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4\u003c\/td\u003e\n\u003ctd\u003e2005–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged TFSI gasoline I4 or 3.2L FSI gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB7 Sedan or Avant; quattro; 2005 facelift VIN from 8E-5-400001; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S4\u003c\/td\u003e\n\u003ctd\u003e2005–2008\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003eB7 Sedan or Avant; quattro; 2005 facelift VIN from 8E-5-400001; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4 Cabriolet\u003c\/td\u003e\n\u003ctd\u003e2007–2009\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged TFSI gasoline I4 or 3.2L FSI gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB7 Convertible; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S4 Cabriolet\u003c\/td\u003e\n\u003ctd\u003e2007–2009\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003eB7 Convertible; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi RS4\u003c\/td\u003e\n\u003ctd\u003e2007–2008\u003c\/td\u003e\n\u003ctd\u003e4.2L FSI gasoline V8\u003c\/td\u003e\n\u003ctd\u003eB7 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi RS4 Cabriolet\u003c\/td\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003e4.2L FSI gasoline V8\u003c\/td\u003e\n\u003ctd\u003eB7 Convertible; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A6\u003c\/td\u003e\n\u003ctd\u003e1998–2001\u003c\/td\u003e\n\u003ctd\u003e2.8L gasoline V6\u003c\/td\u003e\n\u003ctd\u003eC5 Sedan or Avant; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A6\u003c\/td\u003e\n\u003ctd\u003e2002–2004\u003c\/td\u003e\n\u003ctd\u003e3.0L gasoline V6\u003c\/td\u003e\n\u003ctd\u003eC5 Sedan or Avant; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A6\u003c\/td\u003e\n\u003ctd\u003e2000–2004\u003c\/td\u003e\n\u003ctd\u003e2.7L twin-turbocharged gasoline V6\u003c\/td\u003e\n\u003ctd\u003eC5 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A6\u003c\/td\u003e\n\u003ctd\u003e2000–2004\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003eC5 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi allroad\u003c\/td\u003e\n\u003ctd\u003e2001–2005\u003c\/td\u003e\n\u003ctd\u003e2.7L twin-turbocharged gasoline V6\u003c\/td\u003e\n\u003ctd\u003eC5 Wagon; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi allroad\u003c\/td\u003e\n\u003ctd\u003e2004–2005\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003eC5 Wagon; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S6 Avant\u003c\/td\u003e\n\u003ctd\u003e2002–2003\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003eC5 Wagon; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi RS6\u003c\/td\u003e\n\u003ctd\u003e2003\u003c\/td\u003e\n\u003ctd\u003e4.2L twin-turbocharged gasoline V8\u003c\/td\u003e\n\u003ctd\u003eC5 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A6\u003c\/td\u003e\n\u003ctd\u003e2005–2008\u003c\/td\u003e\n\u003ctd\u003e3.2L FSI gasoline V6 or 4.2L gasoline V8; original engine specification by model year\u003c\/td\u003e\n\u003ctd\u003eC6 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A6 Avant\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e3.2L FSI gasoline V6\u003c\/td\u003e\n\u003ctd\u003eC6 Wagon; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S6\u003c\/td\u003e\n\u003ctd\u003e2007–2011\u003c\/td\u003e\n\u003ctd\u003e5.2L FSI gasoline V10\u003c\/td\u003e\n\u003ctd\u003eC6 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A8\u003c\/td\u003e\n\u003ctd\u003e1997–2003\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003eD2 Sedan; quattro; standard or long wheelbase where assigned; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S8\u003c\/td\u003e\n\u003ctd\u003e2001–2003\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003eD2 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A8\u003c\/td\u003e\n\u003ctd\u003e2004–2010\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003eD3 Sedan; quattro; standard or long wheelbase where assigned; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A8 L\u003c\/td\u003e\n\u003ctd\u003e2005–2009\u003c\/td\u003e\n\u003ctd\u003e6.0L gasoline W12\u003c\/td\u003e\n\u003ctd\u003eD3 Long-wheelbase Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S8\u003c\/td\u003e\n\u003ctd\u003e2007–2009\u003c\/td\u003e\n\u003ctd\u003e5.2L FSI gasoline V10\u003c\/td\u003e\n\u003ctd\u003eD3 Sedan; quattro; Original factory manual or automatic as offered; quattro propeller-shaft end arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOnly the original propeller\/cardan-shaft flange bolt-backing location assigned 803407357; all-wheel-drive PR 1X1 where specified. Match the original plate and joint arrangement. One two-hole plate supplied. Original six-bolt end arrangements commonly use three plates per end; order only the quantity specified for the exact repair. Bolts, seals and shaft are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation and service guidance\u003c\/h3\u003e\u003cp\u003eFollow the factory shaft-removal and flange-fastening procedure. Support the shaft as prescribed and record its original alignment before disturbing the joint. Inspect the mating faces and identify all separately required renewal parts.\u003c\/p\u003e\u003cp\u003eFit the plate in its assigned position beneath the matching pair of bolt heads. Use the exact specified bolts and apply the factory tightening sequence, torque and renewal requirements for that joint. Do not substitute an assumed torque value or mix hardware from another flange arrangement.\u003c\/p\u003e\u003cp\u003eConfirm that every required plate and fastener is installed and that the shaft is correctly aligned and secured. Restore any disturbed guards and perform the prescribed drivetrain checks before returning the vehicle to service.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48030338744497,"sku":"803-407-357","price":18.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/803-407-357-genuine-vw-audi-1.jpg?v=1791947878","url":"https:\/\/hstuning.com\/products\/803-407-357-genuine-vw-audi-drive-shaft-bolt-backing-plate","provider":"HS Tuning ","version":"1.0","type":"link"}