{"product_id":"n-013-811-5-genuine-vw-audi-sealing-washer","title":"N-013-811-5 Genuine VW\/Audi Sealing Washer","description":"\u003ch2\u003eGenuine Fluid Fitting Sealing Washer\u003c\/h2\u003e\u003cp\u003eThe N-013-811-5 Genuine VW\/Audi sealing washer renews the sealing interface at the matched original fitting or sensor seat. Its 10 mm inside diameter and 13.5 mm outside diameter must match the connection being serviced. This listing supplies \u003cstrong\u003eone individual washer\u003c\/strong\u003e; sensors, plugs and fluid lines are separate.\u003c\/p\u003e\u003ch3\u003eTechnical Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOriginal part number: N-013-811-5.\u003c\/li\u003e\n\u003cli\u003eInside diameter: 10 mm.\u003c\/li\u003e\n\u003cli\u003eOutside diameter: 13.5 mm.\u003c\/li\u003e\n\u003cli\u003eFunction: sealing washer for the exact original fitting specified in the vehicle's parts diagram.\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: one washer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe washer creates its seal at the mating faces when the correct component is tightened according to the workshop procedure. A similar-looking ring can have a different seating diameter or profile and may not seal correctly. Match the complete part number rather than choosing only by vehicle name or appearance.\u003c\/p\u003e\u003cp\u003eThe factory hardware is used in several sealing locations across the vehicles listed below. A specifically cataloged application is the power steering pump pressure-sensor seal on the 2002 GTI 337 and 2003 GTI 20th Anniversary. Other engines or trims can use this part in a different location; confirm the original sensor, plug or fitting before ordering.\u003c\/p\u003e\u003ch3\u003eCommon Reasons to Replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe original connection has been opened during sensor or fluid-system service.\u003c\/li\u003e\n\u003cli\u003eThe washer is missing, distorted, split or scored.\u003c\/li\u003e\n\u003cli\u003eThe sealing ring has been compressed during a previous repair.\u003c\/li\u003e\n\u003cli\u003eFluid seepage has been traced to the mating sealing faces.\u003c\/li\u003e\n\u003cli\u003eA previous repair used a sealing ring of the wrong size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA new sealing washer cannot repair a cracked housing, damaged threaded fitting or defective sensor. Inspect the complete connection and identify the source of leakage before replacing parts. Fluid near the fitting may have traveled from another component.\u003c\/p\u003e\u003ch3\u003eInstallation and Service Notes\u003c\/h3\u003e\u003cp\u003eFollow the vehicle-specific repair procedure for the connection being opened, including pressure release and fluid handling where required. Remove the original seal, inspect and clean the mating faces, and position the new washer correctly before tightening.\u003c\/p\u003e\u003cp\u003eUse the tightening specification for the exact sensor, plug or fitting. The washer's diameter alone does not establish torque. Do not overtighten to compensate for leakage, reuse a visibly damaged ring or stack additional washers. Inspect the serviced connection after restoring the system to its correct operating condition.\u003c\/p\u003e\u003cp\u003eFitment is tied to the original parts arrangement. Replacement pumps, sensors, oil pans or other assemblies can use a different seal, so confirm the hardware on the component currently installed in the vehicle.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cp\u003eMatch the model year, engine and configuration below, then confirm the specific original sealing position by VIN or repair diagram.\u003c\/p\u003e\u003cp\u003eThe listed classic GTI 16V profiles apply to specified fuel-injection line unions, while the Corrado G60 profile applies to the assigned G-Lader sealing point. Replace a crushed or damaged washer during joint service and inspect the mating sealing faces if leakage persists.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A3\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged FSI gasoline\u003c\/td\u003e\n\u003ctd\u003e8P; front-wheel drive; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A3\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged TSI gasoline\u003c\/td\u003e\n\u003ctd\u003e8P; front-wheel drive or quattro; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4\u003c\/td\u003e\n\u003ctd\u003e1997–2001\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline\u003c\/td\u003e\n\u003ctd\u003eB5; front-wheel drive or quattro; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4\u003c\/td\u003e\n\u003ctd\u003e2002–2005\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline\u003c\/td\u003e\n\u003ctd\u003eB6; Sedan or Avant; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged gasoline\u003c\/td\u003e\n\u003ctd\u003eB7; Sedan or Avant; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S6\u003c\/td\u003e\n\u003ctd\u003e2013–2018\u003c\/td\u003e\n\u003ctd\u003e4.0L twin-turbocharged V8 gasoline\u003c\/td\u003e\n\u003ctd\u003eC7; quattro Sedan; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e1995–1999\u003c\/td\u003e\n\u003ctd\u003e2.8L 12-valve VR6 gasoline\u003c\/td\u003e\n\u003ctd\u003eMk3; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta\u003c\/td\u003e\n\u003ctd\u003e1994–1999\u003c\/td\u003e\n\u003ctd\u003e2.8L 12-valve VR6 gasoline\u003c\/td\u003e\n\u003ctd\u003eMk3; GLX; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2000–2005\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline\u003c\/td\u003e\n\u003ctd\u003eMk4; includes 2002 337 and 2003 20th Anniversary; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003ePower steering pump pressure-sensor sealing application confirmed for 2002 337 and 2003 20th Anniversary; other trims require original fitting confirmation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta\u003c\/td\u003e\n\u003ctd\u003e2000–2005\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline\u003c\/td\u003e\n\u003ctd\u003eMk4; includes 2004.5–2005 GLI; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta\u003c\/td\u003e\n\u003ctd\u003e2005–2010\u003c\/td\u003e\n\u003ctd\u003e2.5L five-cylinder gasoline\u003c\/td\u003e\n\u003ctd\u003eMk5; 2005 new-body sedan; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta\u003c\/td\u003e\n\u003ctd\u003e2005–2006\u003c\/td\u003e\n\u003ctd\u003e1.9L TDI diesel\u003c\/td\u003e\n\u003ctd\u003eMk5; 2005 new-body sedan; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta\u003c\/td\u003e\n\u003ctd\u003e2009–2010\u003c\/td\u003e\n\u003ctd\u003e2.0L common-rail TDI diesel\u003c\/td\u003e\n\u003ctd\u003eMk5; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Passat\u003c\/td\u003e\n\u003ctd\u003e1998–2005\u003c\/td\u003e\n\u003ctd\u003e1.8L turbocharged gasoline\u003c\/td\u003e\n\u003ctd\u003eB5 \/ B5.5; front-wheel drive; Match the original fitting; no separate transmission restriction in source\u003c\/td\u003e\n\u003ctd\u003eOriginal sealing locations requiring N-013-811-5. Match the complete part number and specific fluid fitting or sensor seat; location varies by engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Corrado\u003c\/td\u003e\n\u003ctd\u003e1990–1992\u003c\/td\u003e\n\u003ctd\u003e1.8L supercharged gasoline; PG\u003c\/td\u003e\n\u003ctd\u003eG60 coupe; Original factory configuration; sealing position dependent\u003c\/td\u003e\n\u003ctd\u003eSpecified G-Lader assembly sealing position; excludes VR6 and unrelated fluid plugs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e1987–1989\u003c\/td\u003e\n\u003ctd\u003e1.8L 16-valve gasoline\u003c\/td\u003e\n\u003ctd\u003eMk2 hatchback; Original factory configuration; sealing position dependent\u003c\/td\u003e\n\u003ctd\u003eSpecified fuel-injection-line sealing position; verify the original union. Not a generic engine oil-drain seal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e1990–1992\u003c\/td\u003e\n\u003ctd\u003e2.0L 16-valve gasoline\u003c\/td\u003e\n\u003ctd\u003eMk2 hatchback; Original factory configuration; sealing position dependent\u003c\/td\u003e\n\u003ctd\u003eSpecified fuel-injection-line sealing position; verify the original union. Excludes eight-valve and Mk3 applications at this position.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48014276722865,"sku":"N-013-811-5","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-013-811-5-genuine-vw-audi-1.jpg?v=1791591795","url":"https:\/\/hstuning.com\/products\/n-013-811-5-genuine-vw-audi-sealing-washer","provider":"HS Tuning ","version":"1.0","type":"link"}