{"product_id":"n-101-244-08-genuine-vw-audi-socket-head-bolt-with-washer-m6-x-20-mm","title":"N-101-244-08 Genuine VW\/Audi Socket-Head Bolt with Washer - M6 x 20 mm","description":"\u003cp\u003e\u003cstrong\u003eGenuine VW\/Audi socket-head bolt with washer, part number N-101-244-08.\u003c\/strong\u003e This original fastener retains the specified component at its mounting point. The selected applications below place it in coolant-pump, thermostat-unit and auxiliary-pump bracket assemblies. Its function depends on the actual attachment; it is not a complete thermostat, pump or coolant seal.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOriginal part number: \u003cstrong\u003eN-101-244-08\u003c\/strong\u003e \/ N10124408.\u003c\/li\u003e\n\u003cli\u003ePublished nominal size: \u003cstrong\u003eM6 x 20 mm\u003c\/strong\u003e, with a cylindrical head, internal six-lobe drive and washer.\u003c\/li\u003e\n\u003cli\u003eThe recessed drive allows the fastener to be tightened at its specified mounting location. Use a correctly fitting drive bit to protect the recess.\u003c\/li\u003e\n\u003cli\u003eThe washer provides the intended bearing interface at the attachment. Match the original assembly rather than adding extra washers or using a different fastener length.\u003c\/li\u003e\n\u003cli\u003eSupplied individually as pictured. Coolant pumps, thermostats, hoses, brackets, gaskets and other mounting hardware are separate.\u003c\/li\u003e\n\u003cli\u003eSome thermostat assemblies include this bolt. Inspect the contents of the replacement assembly before ordering separate hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cp\u003eReplace the bolt if its internal drive is rounded, its threads are damaged or corroded, its washer is deformed or it is missing after disassembly. Hardware that does not seat correctly can prevent the prescribed component from being retained as intended.\u003c\/p\u003e\u003cp\u003eWhen servicing a pump or thermostat, inspect the mating threads and contact surfaces as well as the fastener. A coolant leak can originate from a gasket, housing, pipe connection or damaged component. A new bolt will not repair a cracked housing or a failed seal, and additional tightening can damage threads or distort the mounted part.\u003c\/p\u003e\u003ch3\u003eInstallation and service notes\u003c\/h3\u003e\u003cp\u003eFollow the factory procedure for the specific mounting application. For work that opens the cooling circuit, allow the engine to cool and relieve pressure as directed before disassembly. Keep debris out of exposed passages and replace seals that the repair procedure requires.\u003c\/p\u003e\u003cp\u003ePosition the component correctly, start the bolt by hand and confirm smooth thread engagement. Use the prescribed tightening sequence, torque and thread preparation. The M6 dimension does not provide a universal torque specification, and specifications from a different pump or bracket are not interchangeable.\u003c\/p\u003e\u003cp\u003eInspect the completed attachment for proper seating and clearance. If the cooling circuit has been opened, refill and bleed it according to the vehicle procedure and verify leak-free operation after service. Confirm any companion fasteners identified as single-use are renewed.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eEquipment and mounting application\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi Q3 quattro\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003e2.0L turbo gasoline\u003c\/td\u003e\n\u003ctd\u003ePremium SUV. Auxiliary coolant-pump bolt, diagram position 2; match the original pump and hardware.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi TT quattro\u003c\/td\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003e2.0L turbo gasoline\u003c\/td\u003e\n\u003ctd\u003eBase, all-wheel drive. Thermostat-unit bolt, diagram position 6; catalog notes it is included with the thermostat unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi TT\u003c\/td\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbo gasoline\u003c\/td\u003e\n\u003ctd\u003eBase, front-wheel drive. Thermostat-unit bolt, diagram position 6; match the original thermostat assembly.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi TTS quattro\u003c\/td\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003e2.0L turbo gasoline\u003c\/td\u003e\n\u003ctd\u003eBase, all-wheel drive. Auxiliary coolant-pump mount-bracket bolt, diagram position 3; match the original bracket.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eConfirm the original part number and the specific pump, thermostat or bracket position before ordering. One bolt with washer is supplied.\u003c\/em\u003e\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48004686872753,"sku":"N-101-244-08","price":4.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-101-244-08-genuine-vw-audi-1.jpg?v=1791170777","url":"https:\/\/hstuning.com\/products\/n-101-244-08-genuine-vw-audi-socket-head-bolt-with-washer-m6-x-20-mm","provider":"HS Tuning ","version":"1.0","type":"link"}