{"product_id":"n-101-992-01-genuine-vw-audi-purge-valve-hose-clamp-15-7-mm","title":"N-101-992-01 Genuine VW\/Audi Purge Valve Hose Clamp - 15.7 mm","description":"\u003cp\u003e\u003cstrong\u003eGenuine VW\/Audi purge valve hose clamp, part number N-101-992-01.\u003c\/strong\u003e This original clamp retains the specified hose connection at the purge valve on the confirmed configuration below. One clamp is supplied.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOriginal number: N-101-992-01 \/ N10199201.\u003c\/li\u003e\n\u003cli\u003ePublished nominal catalog dimensions: 15.7 x 7 x 0.6 mm.\u003c\/li\u003e\n\u003cli\u003eMetal band with a formed closure, as pictured.\u003c\/li\u003e\n\u003cli\u003eApplication: specified purge valve hose attachment.\u003c\/li\u003e\n\u003cli\u003ePurge valve, hoses and other clamps are separate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe purge valve is part of the fuel vapor control system. Its hose connections must be correctly retained at their fittings. This clamp secures the assigned connection; it does not control purge flow or replace the valve.\u003c\/p\u003e\u003cp\u003eThe correct clamp size and closure arrangement must match the fitted hose and connection. Other nearby hoses can use different clamp diameters. Select by original number and mounting position rather than assuming every purge-system connection uses the same hardware.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cp\u003eInspect the clamp when removing the purge valve or servicing a hose connection. Replace missing hardware, a damaged closure, deformation or corrosion that prevents secure installation. Renew a removed clamp wherever the factory procedure or closure design requires replacement.\u003c\/p\u003e\u003cp\u003ePrevious repairs can leave a clamp that is incorrectly sized or installed away from the prescribed position. Check that the hose is properly seated and that the clamp matches the connection. Extra tightening or a different improvised clamp is not a repair for a damaged hose or fitting.\u003c\/p\u003e\u003cp\u003eFuel-vapor system faults, abnormal idle or an emissions warning require diagnosis of the complete system. A replacement clamp cannot repair a failed purge valve, split hose, damaged fitting or fault elsewhere in the vapor circuit. Correct the diagnosed condition before reassembly.\u003c\/p\u003e\u003ch3\u003eInstallation and service notes\u003c\/h3\u003e\u003cp\u003eFollow the factory purge valve and hose procedure for the exact engine and fitted system. Observe the prescribed precautions for opening fuel-vapor connections and protect nearby components during service.\u003c\/p\u003e\u003cp\u003eIdentify the assigned clamp and inspect the hose, fitting and retention area before fitting new hardware. A hose that is hardened, split or distorted should be addressed according to the repair procedure. Obtain the hose or valve separately where required.\u003c\/p\u003e\u003cp\u003eSeat the hose fully at its designated connection and position the clamp as prescribed. Use the correct tool and closure method for this band design. Do not attempt to adjust it as though it were a screw-type hose clamp.\u003c\/p\u003e\u003cp\u003eEnsure the closure is correctly engaged and that the clamp is not twisted, over the wrong section of the fitting or trapping adjacent components. Do not use the clamp to compensate for a mismatched hose diameter or an incorrectly fitted valve.\u003c\/p\u003e\u003cp\u003eWhere an updated valve, replacement hose assembly or aftermarket component is fitted, confirm the verified hardware requirements for that exact arrangement. The original number does not establish compatibility with every replacement hose design.\u003c\/p\u003e\u003cp\u003eAfter assembly, restore the specified hose routing and complete the required vapor-system checks. Confirm the serviced connection is securely retained and that no hose is kinked or rubbing surrounding components. This listing supplies one clamp; obtain the remaining service components separately.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged FSI gasoline, BPY\u003c\/td\u003e\n\u003ctd\u003eMk5 hatchback, front-wheel drive; 6-speed manual\u003c\/td\u003e\n\u003ctd\u003eOriginal purge valve hose connection requiring N10199201. Match fitted hose, fitting and assigned clamp position. Other hose sizes and replacement assemblies may require different clamps. One clamp supplied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged FSI gasoline, BPY\u003c\/td\u003e\n\u003ctd\u003eMk5 hatchback, front-wheel drive; 6-speed DSG\u003c\/td\u003e\n\u003ctd\u003eOriginal purge valve hose connection requiring N10199201. Match fitted hose, fitting and assigned clamp position. Other hose sizes and replacement assemblies may require different clamps. One clamp supplied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged FSI gasoline, BPY\u003c\/td\u003e\n\u003ctd\u003eMk5 sedan, front-wheel drive; 2.0T \/ GLI with BPY FSI engine; 6-speed manual\u003c\/td\u003e\n\u003ctd\u003eOriginal purge valve hose connection requiring N10199201. BPY FSI only, including 2008 vehicles retaining BPY; later TSI arrangements are not established here. Match hose, fitting and clamp position. One clamp supplied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged FSI gasoline, BPY\u003c\/td\u003e\n\u003ctd\u003eMk5 sedan, front-wheel drive; 2.0T \/ GLI with BPY FSI engine; 6-speed DSG\u003c\/td\u003e\n\u003ctd\u003eOriginal purge valve hose connection requiring N10199201. BPY FSI only, including 2008 vehicles retaining BPY; later TSI arrangements are not established here. Match hose, fitting and clamp position. One clamp supplied.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eConfirm N10199201 at the original purge valve hose connection. One clamp supplied.\u003c\/em\u003e\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48012045123761,"sku":"N-101-992-01","price":2.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-101-992-01-genuine-vw-audi-1.jpg?v=1791475372","url":"https:\/\/hstuning.com\/products\/n-101-992-01-genuine-vw-audi-purge-valve-hose-clamp-15-7-mm","provider":"HS Tuning ","version":"1.0","type":"link"}