{"product_id":"n-105-453-02-genuine-vw-audi-vacuum-reservoir-mounting-screw","title":"N-105-453-02 Genuine VW\/Audi Vacuum Reservoir Mounting Screw","description":"\u003ch2\u003eGenuine vacuum-reservoir attachment screw\u003c\/h2\u003e\u003cp\u003eThe N-105-453-02 Genuine VW\/Audi panel screw secures the assigned original vacuum-reservoir mounting connection on the S6 application listed below. The factory specification includes a 4.2 × 55 screw and flocked finish at the head.\u003c\/p\u003e\u003cp\u003eThe vacuum-reservoir assembly also uses separate retainer hardware, insert nuts and other screws. Match this complete number to the assigned receiving point instead of selecting hardware only by the reservoir or engine appearance.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete factory number: N-105-453-02.\u003c\/li\u003e\n\u003cli\u003eFactory specification: 4.2 × 55; flocked.\u003c\/li\u003e\n\u003cli\u003eDesign: socket-head panel screw with the original flocked-head finish.\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: one individual screw.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe nominal size identifies the screw itself rather than packaged shipping dimensions. Match the original receiving insert and seating arrangement. This panel screw is not interchangeable with a machine-thread bolt or the separate 5 × 24 fastener shown in the same assembly.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe original screw is missing after reservoir or bracket removal.\u003c\/li\u003e\n\u003cli\u003eThe drive head or screw threads are damaged.\u003c\/li\u003e\n\u003cli\u003eThe screw has bent and will not align or seat correctly.\u003c\/li\u003e\n\u003cli\u003eThe specified head finish is damaged during previous service.\u003c\/li\u003e\n\u003cli\u003eAn incorrect substitute screw was installed previously.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspect the reservoir, retaining bracket and receiving insert before fitting the screw. A new fastener cannot repair a cracked reservoir, damaged mount or stripped insert. Vacuum leaks and engine faults require diagnosis of the complete system.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eThe row requires the original TV7 4.0L gasoline V8 vacuum-reservoir arrangement. Six-cylinder engines and other reservoir connections require separate confirmation.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eAudi S6\u003c\/td\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003e4.0L TFSI twin-turbocharged gasoline V8; PR TV7\u003c\/td\u003e\n\u003ctd\u003eC7 sedan; quattro; 7-speed S tronic; original vacuum-reservoir mounting\u003c\/td\u003e\n\u003ctd\u003ePR TV7 original vacuum reservoir\/retainer arrangement assigned N10545302 4.2×55 flocked screw. Excludes six-cylinder gasoline and non-domestic TG1 diesel branch.\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation guidance\u003c\/h3\u003e\u003cp\u003eFollow the factory vacuum-reservoir access and installation procedure. Keep hoses and connections identified, align the reservoir and retainer without strain and engage the correct receiving insert carefully. Use the actual drive tool and prescribed tightening instruction for the attachment.\u003c\/p\u003e\u003cp\u003eConfirm the reservoir is supported correctly and the screw head seats without distorting the mount. Restore all hoses and retainers disturbed during access, verify routing and perform the prescribed vacuum-system checks.\u003c\/p\u003e\u003ch3\u003eOrdering information\u003c\/h3\u003e\u003cp\u003eSupplied as one genuine screw. Vacuum reservoir, retainer, insert nut, hoses and a complete hardware kit are not included. Confirm the quantity required for the original attachment.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48046911750321,"sku":"N-105-453-02","price":3.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-105-453-02-genuine-vw-audi-1.jpg?v=1792129788","url":"https:\/\/hstuning.com\/products\/n-105-453-02-genuine-vw-audi-vacuum-reservoir-mounting-screw","provider":"HS Tuning ","version":"1.0","type":"link"}