{"product_id":"n-106-261-01-genuine-vw-audi-intake-throttle-body-screw","title":"N-106-261-01 Genuine VW\/Audi Intake \/ Throttle Body Screw","description":"\u003cp\u003e\u003cstrong\u003eGenuine VW\/Audi intake \/ throttle body screw, part number N-106-261-01.\u003c\/strong\u003e This low-profile fastener secures the matching intake assembly connection. At the throttle-body mounting position, correctly installed screws hold the flange evenly against its seal so that the intake connection stays properly seated.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOriginal part number: \u003cstrong\u003eN-106-261-01\u003c\/strong\u003e \/ N10626101.\u003c\/li\u003e\n\u003cli\u003eFactory catalog designation: \u003cstrong\u003e6 x 45 mm\u003c\/strong\u003e; nominal fastener diameter and length, not shipping dimensions.\u003c\/li\u003e\n\u003cli\u003eThread-forming profile and internal drive head, visible in the product photo.\u003c\/li\u003e\n\u003cli\u003eUsed in matching intake-system fastening positions; confirm the precise location and parts assignment by VIN.\u003c\/li\u003e\n\u003cli\u003eSupplied as one screw. This listing is not a four-piece throttle-body hardware set.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cp\u003eReplace damaged or missing hardware when servicing the matching throttle body or intake component. A worn drive recess, damaged thread-forming profile, corrosion or a screw that cannot tighten correctly can compromise the connection. Inspect the mating fastening bore and flange whenever the installed screw appears damaged or incorrect.\u003c\/p\u003e\u003cp\u003eA poorly seated intake flange can contribute to an air leak, but a new screw alone does not repair a cracked housing, damaged gasket or stripped fastening bore. Rough idle, intake-related fault codes or uneven operation need diagnosis of the full intake system before the hardware is blamed.\u003c\/p\u003e\u003ch3\u003eInstallation and service notes\u003c\/h3\u003e\u003cp\u003eVerify the exact screw number, installed component and required quantity before ordering. Similar head shapes do not establish interchangeability. This is a thread-forming fastener; do not treat its nominal diameter as permission to substitute a conventional machine-thread bolt or to apply a generic bolt torque.\u003c\/p\u003e\u003cp\u003eSeat the intake component and seal correctly before tightening. Use the specified internal-drive tool and follow the VIN-specific sequence and torque for the actual fastening position. Tightening into a damaged bore or overtightening a plastic housing can prevent proper clamping. Check related seals and replace other hardware when required by the repair procedure.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A3\u003c\/td\u003e\n\u003ctd\u003e2009–2013\u003c\/td\u003e\n\u003ctd\u003e2.0L TFSI gasoline, CCTA \/ CBFA\u003c\/td\u003e\n\u003ctd\u003e8P hatchback, front-wheel drive or quattro; Manual or automatic; matching intake \/ throttle-body fastening position\u003c\/td\u003e\n\u003ctd\u003eConfirm VIN and installed intake assembly. Thread-forming 6 x 45 fastener; other screws and positions are not interchangeable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2010–2014\u003c\/td\u003e\n\u003ctd\u003e2.0L TSI gasoline, CCTA \/ CBFA\u003c\/td\u003e\n\u003ctd\u003eMk6 hatchback; Manual or automatic; matching intake \/ throttle-body fastening position\u003c\/td\u003e\n\u003ctd\u003eConfirm VIN and installed intake assembly. Thread-forming 6 x 45 fastener; other screws and positions are not interchangeable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen CC\u003c\/td\u003e\n\u003ctd\u003e2009–2017\u003c\/td\u003e\n\u003ctd\u003e2.0L TSI gasoline, CCTA \/ CBFA where fitted\u003c\/td\u003e\n\u003ctd\u003e2.0T sedan, front-wheel drive; Manual or automatic; matching intake \/ throttle-body fastening position\u003c\/td\u003e\n\u003ctd\u003eConfirm VIN and installed intake assembly. Thread-forming 6 x 45 fastener; other screws and positions are not interchangeable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Tiguan\u003c\/td\u003e\n\u003ctd\u003e2009–2017\u003c\/td\u003e\n\u003ctd\u003e2.0L TSI gasoline, CCTA\u003c\/td\u003e\n\u003ctd\u003eFirst-generation SUV, front-wheel drive or 4Motion; Manual or automatic; matching intake \/ throttle-body fastening position\u003c\/td\u003e\n\u003ctd\u003eConfirm VIN and installed intake assembly. Thread-forming 6 x 45 fastener; other screws and positions are not interchangeable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Tiguan Limited\u003c\/td\u003e\n\u003ctd\u003e2017–2018\u003c\/td\u003e\n\u003ctd\u003e2.0L TSI gasoline, CCTA\u003c\/td\u003e\n\u003ctd\u003eFirst-generation Limited SUV; Manual or automatic; matching intake \/ throttle-body fastening position\u003c\/td\u003e\n\u003ctd\u003eConfirm VIN and installed intake assembly. Thread-forming 6 x 45 fastener; other screws and positions are not interchangeable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Jetta GLI\u003c\/td\u003e\n\u003ctd\u003e2015–2017\u003c\/td\u003e\n\u003ctd\u003e2.0L TSI gasoline, CPLA \/ CPPA\u003c\/td\u003e\n\u003ctd\u003eGLI sedan; Manual or automatic; matching intake \/ throttle-body fastening position\u003c\/td\u003e\n\u003ctd\u003eConfirm VIN and installed intake assembly. Thread-forming 6 x 45 fastener; other screws and positions are not interchangeable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2015–2017\u003c\/td\u003e\n\u003ctd\u003e2.0L TSI gasoline\u003c\/td\u003e\n\u003ctd\u003eMk7 hatchback; Manual or automatic; matching intake \/ throttle-body fastening position\u003c\/td\u003e\n\u003ctd\u003eConfirm VIN and installed intake assembly. Thread-forming 6 x 45 fastener; other screws and positions are not interchangeable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4 quattro\u003c\/td\u003e\n\u003ctd\u003e2005–2008\u003c\/td\u003e\n\u003ctd\u003e3.2L FSI gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB7 sedan \/ Avant; 2005 new-body configuration only; Match original intake assembly and fastening position by VIN\u003c\/td\u003e\n\u003ctd\u003eThread-forming 6x45 intake fastener only at the position specified for this number; verify original manifold and screw before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e3.2L FSI gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB7 front-wheel-drive sedan; Match original intake assembly and fastening position by VIN\u003c\/td\u003e\n\u003ctd\u003eThread-forming 6x45 intake fastener only at the position specified for this number; verify original manifold and screw before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4 Cabriolet\u003c\/td\u003e\n\u003ctd\u003e2007–2009\u003c\/td\u003e\n\u003ctd\u003e3.2L FSI gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB7 quattro convertible; Match original intake assembly and fastening position by VIN\u003c\/td\u003e\n\u003ctd\u003eThread-forming 6x45 intake fastener only at the position specified for this number; verify original manifold and screw before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A5\u003c\/td\u003e\n\u003ctd\u003e2008–2010\u003c\/td\u003e\n\u003ctd\u003e3.2L FSI gasoline V6\u003c\/td\u003e\n\u003ctd\u003eB8 quattro coupe; Match original intake assembly and fastening position by VIN\u003c\/td\u003e\n\u003ctd\u003eThread-forming 6x45 intake fastener only at the position specified for this number; verify original manifold and screw before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi Q5\u003c\/td\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003e3.2L FSI gasoline V6\u003c\/td\u003e\n\u003ctd\u003e8R SUV; Match original intake assembly and fastening position by VIN\u003c\/td\u003e\n\u003ctd\u003eThread-forming 6x45 intake fastener only at the position specified for this number; verify original manifold and screw before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A4\u003c\/td\u003e\n\u003ctd\u003e2009–2010\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged gasoline inline-4\u003c\/td\u003e\n\u003ctd\u003eB8 front-wheel-drive \/ quattro sedan; quattro Avant; Match original intake assembly and fastening position by VIN\u003c\/td\u003e\n\u003ctd\u003eThread-forming 6x45 intake fastener only at the position specified for this number; verify original manifold and screw before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eConfirm engine code, intake assembly and screw position. These gasoline configurations do not establish fitment for diesel or other engine versions.\u003c\/em\u003e\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48001346601137,"sku":"N-106-261-01","price":0.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-106-261-01-genuine-vw-audi-intake-throttle-body-screw-01.png?v=1790985048","url":"https:\/\/hstuning.com\/products\/n-106-261-01-genuine-vw-audi-intake-throttle-body-screw","provider":"HS Tuning ","version":"1.0","type":"link"}