{"product_id":"n-107-441-01-genuine-vw-audi-6x12-countersunk-body-rivet","title":"N-107-441-01 Genuine VW\/Audi 6x12 Countersunk Body Rivet","description":"\u003ch2\u003eGenuine VW\/Audi 6 × 12mm Countersunk Body Rivet\u003c\/h2\u003e\u003cp\u003eN-107-441-01 is the genuine countersunk rivet used at specifically assigned factory body repair joints. Its nominal 6 × 12mm specification identifies the required rivet size; the correct repair location and joining procedure determine its suitability.\u003c\/p\u003e\u003cp\u003eThis listing supplies one individual rivet, as shown. It is a small body repair fastener, separate from the body panels and aperture assemblies it can secure. Panels, adhesives, setting tools and additional fasteners are not included.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete factory number: N-107-441-01.\u003c\/li\u003e\n\u003cli\u003eFactory specification: Countersunk rivet; nominal 6 × 12mm; full factory number N10744101.\u003c\/li\u003e\n\u003cli\u003eDesign: Silver metal rivet with a countersunk head and short body; match the original specified joining hardware.\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: one individual rivet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRivets with different diameters, lengths or head forms are not interchangeable merely because they appear in the same repair diagram. The adjacent 6 × 10mm and 4 × 12mm rivet numbers describe different hardware. Factory order quantities shown in some catalogs do not mean this listing supplies a 100-piece pack.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplacement of a rivet removed during an approved body repair.\u003c\/li\u003e\n\u003cli\u003eDamaged or missing fastening hardware at a confirmed original repair joint.\u003c\/li\u003e\n\u003cli\u003eIncorrect rivet size or head form identified from previous repair work.\u003c\/li\u003e\n\u003cli\u003eA joint repair that specifically requires new N10744101 hardware under the applicable factory procedure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAssess the surrounding panel, hole condition and joint before selecting hardware. A rivet cannot restore a distorted or damaged mounting area by itself. Body joining methods may require particular tools, surface preparation and additional materials; follow the procedure for the exact vehicle and repair location.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eThe table limits this listing to the confirmed original repair application. Match the full factory number and exact joint rather than selecting by vehicle model or nominal size alone.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eAudi Q7\u003c\/td\u003e\n\u003ctd\u003e2018–2019\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged gasoline inline-four\u003c\/td\u003e\n\u003ctd\u003e4M; Premium Plus; original body aperture assembly\u003c\/td\u003e\n\u003ctd\u003eSpecified original 6 × 12mm aperture\/body repair rivet position requiring N10744101; catalog position 2 at assigned right-side assembly. Exact repair location and joining procedure must match. One individual rivet; no panel, adhesive or bulk pack included.\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation guidance\u003c\/h3\u003e\u003cp\u003eUse the vehicle's factory body repair instructions to identify the specified rivet type, permitted joining method and required setting equipment. Prepare and align the approved repair parts before installation, protecting nearby wiring and components. Do not substitute a generic pop-rivet procedure for the specified factory method.\u003c\/p\u003e\u003cp\u003eInstall new hardware with the correct equipment and verify that the joint and head are seated as required. Complete any specified corrosion protection and inspect the surrounding repair. Related adhesive, panels and other rivet sizes must be ordered separately where the repair procedure requires them.\u003c\/p\u003e\u003ch3\u003eOrdering information\u003c\/h3\u003e\u003cp\u003eOne individual N-107-441-01 rivet is supplied. Confirm nominal 6 × 12mm size, countersunk head and the original repair assignment by VIN. The gallery repeats the original archive photo where needed and does not represent a multi-piece kit.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48048456827057,"sku":"N-107-441-01","price":18.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-107-441-01-genuine-vw-audi-1.jpg?v=1792150255","url":"https:\/\/hstuning.com\/products\/n-107-441-01-genuine-vw-audi-6x12-countersunk-body-rivet","provider":"HS Tuning ","version":"1.0","type":"link"}