{"product_id":"n-903-152-04-genuine-vw-audi-engine-mounting-washer","title":"N-903-152-04 Genuine VW\/Audi Engine Mounting Washer","description":"\u003ch2\u003eThe specified washer for the original engine mounting connection\u003c\/h2\u003e\u003cp\u003eN-903-152-04 is the Genuine VW\/Audi flat washer assigned to the engine mounting assemblies listed below. Its 34 mm outside diameter and 4 mm thickness establish the bearing surface and spacing of the original connection.\u003c\/p\u003e\u003cp\u003eUse the complete factory number to identify the correct mounting position. This washer supports the original hardware arrangement; it does not replace an engine mount, bracket, bolt or a complete mounting kit.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete factory number: N-903-152-04.\u003c\/li\u003e\n\u003cli\u003eFactory specification: 10.5 mm inside diameter × 34 mm outside diameter × 4 mm thickness.\u003c\/li\u003e\n\u003cli\u003eDesign: flat engine mounting washer.\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: one individual washer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese are nominal component dimensions. The bore, outside diameter and thickness all matter to the original connection. A thinner general-purpose washer or a washer with a smaller bearing face can alter the installed arrangement.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe original washer is missing during engine mounting service.\u003c\/li\u003e\n\u003cli\u003eThe washer is bent, cupped or otherwise distorted.\u003c\/li\u003e\n\u003cli\u003eThe bearing surface is damaged.\u003c\/li\u003e\n\u003cli\u003eCorrosion or wear has compromised the washer.\u003c\/li\u003e\n\u003cli\u003eIncorrect hardware was fitted during a previous repair.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspect the mating bracket, bolt and mounting surface for damage. Check the engine mount separately if there is excessive movement or vibration; replacing a washer alone does not diagnose or repair a failed mount.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eMatch the engine and original mounting location shown in the table. The catalog uses this number at specific positions, so model and year alone do not establish interchangeability throughout the mounting assembly.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi S8\u003c\/td\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003e5.2L gasoline V10\u003c\/td\u003e\n\u003ctd\u003eD3 sedan; quattro; PR T8E; Original engine mounting assembly\u003c\/td\u003e\n\u003ctd\u003eOnly the engine mounting position assigned N90315204. Confirm the original washer and attachment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi A8 L\u003c\/td\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003e6.0L gasoline W12\u003c\/td\u003e\n\u003ctd\u003eD3 long-wheelbase sedan; quattro; PR T1H; Original engine mounting assembly\u003c\/td\u003e\n\u003ctd\u003eOnly the engine mounting position assigned N90315204. Confirm the original washer and attachment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation guidance\u003c\/h3\u003e\u003cp\u003eSupport the engine as required by the factory service procedure before disturbing a mounting connection. Restore the original washer orientation and hardware stack. Follow the specified bolt replacement requirements and connection-specific tightening sequence.\u003c\/p\u003e\u003cp\u003eConfirm the mounting components are seated correctly and all disturbed connections have been secured according to the vehicle-specific procedure.\u003c\/p\u003e\u003ch3\u003eOrdering information\u003c\/h3\u003e\u003cp\u003eOne genuine washer is supplied. Engine mounts, brackets, bolts and additional washers are sold separately. Confirm the original part number and required quantity before ordering.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48047212495025,"sku":"N-903-152-04","price":1.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-903-152-04-genuine-vw-audi-1.jpg?v=1792133492","url":"https:\/\/hstuning.com\/products\/n-903-152-04-genuine-vw-audi-engine-mounting-washer","provider":"HS Tuning ","version":"1.0","type":"link"}