{"product_id":"n-904-055-02-genuine-vw-audi-hybrid-engine-flywheel-bolt","title":"N-904-055-02 Genuine VW\/Audi Hybrid Engine Flywheel Bolt","description":"\u003ch2\u003eGenuine hybrid flywheel attachment bolt\u003c\/h2\u003e\u003cp\u003eThe N-904-055-02 Genuine VW\/Audi hexagon bolt secures the assigned original flywheel connection on the Touareg Hybrid applications listed below. Its M10 fine thread, 1 mm pitch and 22 mm nominal length match the specified factory fastener.\u003c\/p\u003e\u003cp\u003eThe hybrid V6 flywheel arrangement differs from the conventional gasoline and diesel configurations. Match the complete bolt number, engine and original flywheel before ordering. This listing supplies one bolt rather than the complete set used at the connection.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete factory number: N-904-055-02.\u003c\/li\u003e\n\u003cli\u003eFactory specification: M10 × 1 × 22.\u003c\/li\u003e\n\u003cli\u003eDesign: external-hex bolt with the original bearing arrangement for the assigned flywheel attachment.\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: one individual bolt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe nominal specification describes the fastener itself rather than packaged shipping dimensions. Thread pitch, length and seating arrangement all matter to this connection. Do not select a bolt only by its diameter or transfer tightening instructions from a different flywheel.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe factory procedure requires new flywheel bolts during reassembly.\u003c\/li\u003e\n\u003cli\u003eThe threads have been crossed, stripped or otherwise damaged.\u003c\/li\u003e\n\u003cli\u003eThe external hex is rounded or damaged.\u003c\/li\u003e\n\u003cli\u003eThe bolt or bearing surface has been damaged during removal.\u003c\/li\u003e\n\u003cli\u003eA previous repair used incorrect substitute hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspect the flywheel, mating mounting surfaces and receiving threads before assembly. A new bolt cannot repair a damaged flywheel or crankshaft connection. Noise or vibration requires diagnosis of the complete drivetrain rather than replacing a bolt without identifying the cause.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eThe row requires the original supercharged V6 Hybrid flywheel and G1G eight-speed automatic arrangement. Conventional 3.6L VR6 and TDI flywheel connections are excluded from this row.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eVolkswagen Touareg\u003c\/td\u003e\n\u003ctd\u003e2011, 2013, 2015\u003c\/td\u003e\n\u003ctd\u003e3.0L supercharged gasoline V6 hybrid\u003c\/td\u003e\n\u003ctd\u003e7P Hybrid SUV; 4Motion; 8-speed automatic; PR G1G; original 06E105269C flywheel\u003c\/td\u003e\n\u003ctd\u003eOriginal hybrid V6 flywheel connection assigned N90405502 M10×1×22 and 06E105269C flywheel. Excludes conventional 3.6 VR6 and TDI flywheel hardware.\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation guidance\u003c\/h3\u003e\u003cp\u003eFollow the factory hybrid drivetrain and flywheel service procedure, including the prescribed system isolation, support and access steps. Use the specified holding tools, clean or prepare the connection only as instructed and install the required new hardware in the prescribed sequence.\u003c\/p\u003e\u003cp\u003eUse the exact tightening method specified for the engine and flywheel connection. Confirm correct seating and complete all required drivetrain reassembly and post-service checks. Do not reuse damaged hardware or add unapproved locking compounds to compensate for an incorrect bolt.\u003c\/p\u003e\u003ch3\u003eOrdering information\u003c\/h3\u003e\u003cp\u003eSupplied as one genuine bolt. Flywheel, crankshaft, hybrid drive components, tools and a complete bolt set are not included. Confirm the complete number of bolts required for the repair.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48046911783089,"sku":"N-904-055-02","price":2.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-904-055-02-genuine-vw-audi-1.jpg?v=1792129898","url":"https:\/\/hstuning.com\/products\/n-904-055-02-genuine-vw-audi-hybrid-engine-flywheel-bolt","provider":"HS Tuning ","version":"1.0","type":"link"}