{"product_id":"n-907-020-01-genuine-vw-audi-corrugated-tube-joiner-with-side-opening","title":"N-907-020-01 Genuine VW\/Audi Corrugated Tube Joiner with Side Opening","description":"\u003cp\u003eGenuine VW\/Audi N-907-020-01 is an individual corrugated-tube joiner with a side opening for the original wiring-conduit arrangement assigned this part number. The confirmed Eurovan application below lists it in the central wiring assembly. It joins the matching protective conduit sections around the harness at that original location.\u003c\/p\u003e\u003ch3\u003eTechnical details and what is included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFactory part number: N-907-020-01 \/ N90702001.\u003c\/li\u003e\n\u003cli\u003eComponent type: mechanical corrugated wiring-conduit joiner with side opening.\u003c\/li\u003e\n\u003cli\u003eFactory nominal connection designation for the confirmed wiring application: 13 × 13 × 8.5.\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: one individual joiner.\u003c\/li\u003e\n\u003cli\u003eProtective conduit, wiring and other harness components are separately specified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe factory connection designation identifies the prescribed conduit arrangement and is not a shipping or package dimension. Compare the original conduit profiles and branching layout before ordering. This mechanical conduit piece has no electrical contacts and is not a coolant-hose clamp, fluid-line fitting or complete wiring harness.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe original joiner body or attachment feature is broken.\u003c\/li\u003e\n\u003cli\u003eThe piece no longer closes or supports the matching conduit sections correctly.\u003c\/li\u003e\n\u003cli\u003eThe joiner is lost or damaged during wiring-harness service.\u003c\/li\u003e\n\u003cli\u003eInspection identifies a damaged original conduit junction at this assigned location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInspect the protective conduit and wire insulation separately. Replacing the joiner does not repair a broken conductor, damaged insulation or a separately cracked conduit section. Renew any damaged components according to the diagnosed condition and factory repair procedure.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eThe confirmed application requires the original corrugated wiring-conduit connection listed below. Similar conduit junctions with different diameters or branch profiles must be checked independently.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eVolkswagen Eurovan\u003c\/td\u003e\n\u003ctd\u003e1997\u003c\/td\u003e\n\u003ctd\u003e2.8L gasoline VR6\u003c\/td\u003e\n\u003ctd\u003eOriginal passenger-van body; front-wheel drive; Original factory automatic transmission; harness conduit arrangement determines fitment\u003c\/td\u003e\n\u003ctd\u003eOriginal corrugated wiring-conduit joining point assigned N90702001, factory nominal connection designation 13 × 13 × 8.5. Match the original conduit sizes and side-branch profile. One mechanical joiner supplied; conduit, wiring and other harness components are separate. Not a coolant-hose clamp or fluid-line connector.\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation and service guidance\u003c\/h3\u003e\u003cp\u003eFollow the factory access and wiring-routing procedure for the affected harness. Release the original conduit junction carefully without pulling on the wiring or cutting the protective conduit. Record the original branch routing and joining arrangement before removal.\u003c\/p\u003e\u003cp\u003eInspect the matching conduit sections and compare the replacement joiner with the original. Fit the specified conduit profiles at their assigned connections, ensuring the wiring is not trapped or pinched as the joiner is closed.\u003c\/p\u003e\u003cp\u003eRestore the factory harness route with the prescribed clearance from moving parts and sharp edges. Verify that the conduit sections remain correctly seated and that the joined harness is free from strain. Complete any circuit checks required for the separate wiring work performed during the repair.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48033569865905,"sku":"N-907-020-01","price":4.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-907-020-01-genuine-vw-audi-1.jpg?v=1791984748","url":"https:\/\/hstuning.com\/products\/n-907-020-01-genuine-vw-audi-corrugated-tube-joiner-with-side-opening","provider":"HS Tuning ","version":"1.0","type":"link"}