{"product_id":"n-909-591-01-genuine-vw-audi-speed-nut-5-x-16-5-x-11","title":"N-909-591-01 Genuine VW\/Audi Speed Nut - 5 x 16.5 x 11","description":"\u003cp\u003e\u003cstrong\u003eGenuine VW\/Audi retaining speed nut, part number N-909-591-01.\u003c\/strong\u003e This original clip nut provides the matching screw attachment at assigned rear bumper and underbody panel positions on the configurations below. Match the original clip number, panel seat and screw before ordering.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOriginal number: N-909-591-01 \/ N90959101.\u003c\/li\u003e\n\u003cli\u003ePublished nominal designation: 5 x 16.5 x 11.\u003c\/li\u003e\n\u003cli\u003eFolded clip form with a screw-retaining opening.\u003c\/li\u003e\n\u003cli\u003eListed application: specified rear bumper hardware position on the Mk5 GTI.\u003c\/li\u003e\n\u003cli\u003eBumper cover, mating screw and other mounting hardware are separate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe retainer clips onto its assigned mounting edge so the specified screw can secure the adjoining component. Its shape and seating depth position the retaining opening relative to the panel. Match the original clip and screw arrangement; this is not a conventional machine-thread hex nut.\u003c\/p\u003e\u003cp\u003eThe nominal designation identifies this particular retainer. It does not establish suitability for every panel or screw of a similar size. Different attachment positions can use different clips, screws and mounting depths even within the same bumper assembly.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cp\u003eInspect the clip during bumper cover removal, refitting or repair of loose mounting hardware. Replace missing clips, damaged screw-retaining features, bent retainers or corrosion that prevents correct seating. A clip that no longer holds its assigned position should be renewed.\u003c\/p\u003e\u003cp\u003ePrevious work may leave an incorrect retainer or a screw that has damaged the retaining opening. Check the screw as well as the clip before reassembly. Selecting the correct pair helps restore the original attachment arrangement.\u003c\/p\u003e\u003cp\u003eA loose cover, uneven panel gap or rattling attachment requires inspection of the complete mounting area. A new speed nut cannot repair a cracked mounting tab, broken bracket, distorted cover or damaged seating edge. Repair the diagnosed support or panel defect before refitting the hardware.\u003c\/p\u003e\u003ch3\u003eInstallation and service notes\u003c\/h3\u003e\u003cp\u003eFor underbody panel service, inspect the panel and clip seat for damage. Position the clip fully in its assigned mounting location, align the panel without forcing it, and start the correct screw by hand. Replace a distorted clip or damaged panel attachment rather than overtightening the screw.\u003c\/p\u003e\u003cp\u003eFollow the factory procedure for the exact bumper and trim arrangement. Identify the original clip position before removal and compare its shape, seating depth and screw location with N90959101. Preserve the prescribed order of the surrounding brackets and panels.\u003c\/p\u003e\u003cp\u003eInspect the mounting edge and remove damaged hardware using the approved method. Fit the retainer in its specified orientation so it seats correctly and the screw opening aligns with the adjoining component. Do not force a clip onto an incompatible panel thickness or damaged attachment.\u003c\/p\u003e\u003cp\u003eUse the prescribed screw and start it carefully through the correctly aligned assembly. Do not use an oversized screw to compensate for damaged retaining features or use the screw to pull a misaligned cover into place.\u003c\/p\u003e\u003cp\u003eFollow the factory tightening requirement for the actual panel attachment. Excessive tightening can damage the retainer, screw or surrounding mounting tabs. If the screw spins without holding, inspect the clip, screw and seat instead of continuing to tighten.\u003c\/p\u003e\u003cp\u003eCheck the completed attachment for secure seating, proper panel alignment and the required clearances. Inspect the other mounting points disturbed during service. This listing supplies one original speed nut; obtain the mating screw and other repair components separately.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged FSI gasoline, BPY\u003c\/td\u003e\n\u003ctd\u003eMk5 hatchback, front-wheel drive; 6-speed manual\u003c\/td\u003e\n\u003ctd\u003eAssigned original speed-nut position in the rear bumper attachment arrangement requiring N90959101. Confirm clip seat and matching screw. One supplied; cover and screws separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged FSI gasoline, BPY\u003c\/td\u003e\n\u003ctd\u003eMk5 hatchback, front-wheel drive; 6-speed DSG\u003c\/td\u003e\n\u003ctd\u003eAssigned original speed-nut position in the rear bumper attachment arrangement requiring N90959101. Confirm clip seat and matching screw. One supplied; cover and screws separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen GTI\u003c\/td\u003e\n\u003ctd\u003e2010–2014\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged TSI gasoline, CCTA \/ CBFA\u003c\/td\u003e\n\u003ctd\u003eMk6 hatchback, front-wheel drive; 6-speed DSG\u003c\/td\u003e\n\u003ctd\u003eOriginal underbody\/skid-plate speed nut N90959101. Confirm the clip seat, original number and matching screw; other panel retainers differ.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eConfirm original N90959101 and the assigned rear bumper clip position before ordering. One retainer supplied.\u003c\/em\u003e\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48008330641585,"sku":"N-909-591-01","price":3.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-909-591-01-genuine-vw-audi-1.jpg?v=1791336970","url":"https:\/\/hstuning.com\/products\/n-909-591-01-genuine-vw-audi-speed-nut-5-x-16-5-x-11","provider":"HS Tuning ","version":"1.0","type":"link"}