{"product_id":"n-910-956-01-genuine-vw-audi-air-suspension-upper-sealing-ring","title":"N-910-956-01 Genuine VW\/Audi Air Suspension Upper Sealing Ring","description":"\u003ch2\u003eGenuine VW\/Audi air suspension upper sealing ring\u003c\/h2\u003e\u003cp\u003eN-910-956-01 is the original upper sealing ring used at the assigned air-spring and upper mounting\/protective-sleeve interface. It provides the specified sealing profile within the factory suspension assembly and is serviced separately from the complete air spring.\u003c\/p\u003e\u003cp\u003eSelect this ring for the original air-suspension arrangement assigned this part number. Conventional coil-spring assemblies and other generations of air suspension use different components. The lower sealing ring and additional suspension hardware are separate parts.\u003c\/p\u003e\u003ch3\u003eTechnical details and supplied quantity\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: N-910-956-01; compact reference N91095601.\u003c\/li\u003e\n\u003cli\u003eBrand: Genuine VW\/Audi.\u003c\/li\u003e\n\u003cli\u003eComponent: upper air-suspension sealing ring.\u003c\/li\u003e\n\u003cli\u003eGenuine supplier size designation: 96 × 4.\u003c\/li\u003e\n\u003cli\u003eQuantity: one ring per purchase. Air spring, shock absorber, sleeve, lower seal and mounting hardware are separate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe sealing profile must match the original groove and mating surfaces. This ring is not a substitute for a damaged air-spring bellows, fitting or sleeve. Check the complete suspension unit identity if a replacement strut or non-original air-spring assembly has previously been fitted.\u003c\/p\u003e\u003ch3\u003eCommon reasons to replace\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe original ring is cut, cracked or distorted during suspension service.\u003c\/li\u003e\n\u003cli\u003eThe upper seal is missing when the original air-spring arrangement is dismantled.\u003c\/li\u003e\n\u003cli\u003eInspection identifies damage at the assigned sealing interface.\u003c\/li\u003e\n\u003cli\u003eThe factory procedure specifies seal renewal when the assembly is opened.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSuspension pressure loss, abnormal ride height or compressor operation requires diagnosis of the complete system. A new ring will not repair a leaking bellows, defective valve, damaged air line or an electrical control fault. Replace this component when the assigned interface is confirmed as requiring service.\u003c\/p\u003e\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\u003cp\u003eThe table applies only to vehicles retaining the original air-suspension assembly assigned N91095601. Air suspension is required. Confirm the original unit and upper sealing arrangement before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eModel years\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eApplication restrictions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Touareg\u003c\/td\u003e\n\u003ctd\u003e2004–2006\u003c\/td\u003e\n\u003ctd\u003e3.2L gasoline VR6\u003c\/td\u003e\n\u003ctd\u003e7L SUV; 4Motion; original air suspension; Factory automatic transmission\u003c\/td\u003e\n\u003ctd\u003eUpper seal at the original air-spring\/protective-sleeve attachment assigned N91095601. Air suspension required; excludes conventional coil-spring mounts and replacement units using a different seal. One ring supplied; lower seals are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Touareg\u003c\/td\u003e\n\u003ctd\u003e2007–2010\u003c\/td\u003e\n\u003ctd\u003e3.6L gasoline VR6\u003c\/td\u003e\n\u003ctd\u003e7L SUV; 4Motion; original air suspension; Factory automatic transmission\u003c\/td\u003e\n\u003ctd\u003eUpper seal at the original air-spring\/protective-sleeve attachment assigned N91095601. Air suspension required; excludes conventional coil-spring mounts and replacement units using a different seal. One ring supplied; lower seals are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Touareg\u003c\/td\u003e\n\u003ctd\u003e2004–2010\u003c\/td\u003e\n\u003ctd\u003e4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003e7L SUV; 4Motion; original air suspension; Factory automatic transmission\u003c\/td\u003e\n\u003ctd\u003eUpper seal at the original air-spring\/protective-sleeve attachment assigned N91095601. Air suspension required; excludes conventional coil-spring mounts and replacement units using a different seal. One ring supplied; lower seals are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Touareg\u003c\/td\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003ctd\u003e5.0L V10 TDI diesel\u003c\/td\u003e\n\u003ctd\u003e7L SUV; 4Motion; original air suspension; Factory automatic transmission\u003c\/td\u003e\n\u003ctd\u003eUpper seal at the original air-spring\/protective-sleeve attachment assigned N91095601. Air suspension required; excludes conventional coil-spring mounts and replacement units using a different seal. One ring supplied; lower seals are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Touareg\u003c\/td\u003e\n\u003ctd\u003e2006–2008\u003c\/td\u003e\n\u003ctd\u003e5.0L V10 TDI diesel\u003c\/td\u003e\n\u003ctd\u003e7L SUV; 4Motion; original air suspension; Factory automatic transmission\u003c\/td\u003e\n\u003ctd\u003eUpper seal at the original air-spring\/protective-sleeve attachment assigned N91095601. Air suspension required; excludes conventional coil-spring mounts and replacement units using a different seal. One ring supplied; lower seals are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolkswagen Touareg\u003c\/td\u003e\n\u003ctd\u003e2009–2010\u003c\/td\u003e\n\u003ctd\u003e3.0L V6 TDI diesel\u003c\/td\u003e\n\u003ctd\u003e7L SUV; 4Motion; original air suspension; Factory automatic transmission\u003c\/td\u003e\n\u003ctd\u003eUpper seal at the original air-spring\/protective-sleeve attachment assigned N91095601. Air suspension required; excludes conventional coil-spring mounts and replacement units using a different seal. One ring supplied; lower seals are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi Q7\u003c\/td\u003e\n\u003ctd\u003e2007–2010\u003c\/td\u003e\n\u003ctd\u003e3.6L gasoline VR6 \/ 4.2L gasoline V8\u003c\/td\u003e\n\u003ctd\u003e4L SUV; quattro; original air suspension; Factory automatic transmission\u003c\/td\u003e\n\u003ctd\u003eUpper seal at the original air-spring\/protective-sleeve attachment assigned N91095601. Air suspension required; excludes conventional coil-spring mounts and replacement units using a different seal. One ring supplied; lower seals are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi Q7\u003c\/td\u003e\n\u003ctd\u003e2011–2015\u003c\/td\u003e\n\u003ctd\u003e3.0L supercharged TFSI gasoline V6\u003c\/td\u003e\n\u003ctd\u003e4L SUV; quattro; original air suspension; Factory automatic transmission\u003c\/td\u003e\n\u003ctd\u003eUpper seal at the original air-spring\/protective-sleeve attachment assigned N91095601. Air suspension required; excludes conventional coil-spring mounts and replacement units using a different seal. One ring supplied; lower seals are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi Q7\u003c\/td\u003e\n\u003ctd\u003e2009–2015\u003c\/td\u003e\n\u003ctd\u003e3.0L V6 TDI diesel\u003c\/td\u003e\n\u003ctd\u003e4L SUV; quattro; original air suspension; Factory automatic transmission\u003c\/td\u003e\n\u003ctd\u003eUpper seal at the original air-spring\/protective-sleeve attachment assigned N91095601. Air suspension required; excludes conventional coil-spring mounts and replacement units using a different seal. One ring supplied; lower seals are separate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation and service guidance\u003c\/h3\u003e\u003cp\u003eFollow the factory air-suspension procedure, including prescribed system depressurization, vehicle support and control-system precautions before dismantling the assembly. Do not open or separate a pressurized air-spring unit.\u003c\/p\u003e\u003cp\u003eInspect the sealing groove and mating surfaces for damage and contamination. Install the correct ring in its specified position without twisting, cutting or stretching it beyond the factory procedure. Use only the lubricant and assembly method prescribed for that suspension unit.\u003c\/p\u003e\u003cp\u003eRestore the sleeve, spring and retaining hardware in the required sequence. Repressurize and perform the specified leak, ride-height and system checks after reassembly. Any remaining pressure loss or control fault requires separate diagnosis.\u003c\/p\u003e","brand":"Genuine VW\/Audi","offers":[{"title":"Default Title","offer_id":48026315718833,"sku":"N-910-956-01","price":9.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/1379\/3201\/files\/n-910-956-01-genuine-vw-audi-1.jpg?v=1791903717","url":"https:\/\/hstuning.com\/products\/n-910-956-01-genuine-vw-audi-air-suspension-upper-sealing-ring","provider":"HS Tuning ","version":"1.0","type":"link"}