Description
This clutch was developed to increase the torque capacity over the original RSR clutch without having a significant increase in clutch pedal effort. The clutch disc is a complete redesign from the original RSR clutch, utilizing an HD organic friction material on the flywheel side, and a segmented, sintered kevlar material on the pressure plate side. This provides a smooth but positive engagement. The lightweight, unsprung hub keeps the mass of the disc as low as possible. We also made a change that puts the engagement point slightly further up the pedal travel than the original RSR, or roughly in the stock engagement point area. Although the RSR hybrid isn’t silent at idle without the clutch pedal depressed it’s notably more quiet than most single mass clutches, and it does not have any of the noise that single mass kits have during low rpm acceleration or high rpm deceleration. A great deal of time, effort, and testing went into this clutch. The results have been very positive! We recommend this clutch for all high output MQB cars, and FSI / TSI cars that have turbo upgrades.
We do not recommend using a dual mass style clutch for any car that is primarily or exclusively used for drag racing. If your car is exclusively used for drag racing, please look at our Southbend Drag or DKM Twin Disc options.
Crank Torque Holding Measurements:
550 ft/lbs
745 Nm
Basic kit includes: Clutch disc, pressure plate, plastic throwout bearing, pressure plate and throwout bearing bolts.
Along with this kit we also offer new Clutch Install Hardware Kits. When having everything apart we also recommend our Transmission Fluid Service Kit. All kits come only with OEM VW/Audi hardware. Details below.
Be sure to select the appropriate product options before placing this into your cart.
RSR utilizes the factory Dual Mass Flywheel. Does not work with a Single Mass Flywheel!!!
Clutch Install Hardware Kits: All bolts that should be replaced when doing a clutch replacement.
GTI/ GLI:
2 – Axle Bolts
3 – Transmission Mount to Bracket Bolts
3 – Transmission Bracket to Transmission Bolts
3 – Torque Arm Bolts
6 – Ball Joint to Control Arm Nuts
4 – Bevel Box Bolt
Transmission Fluid Service Kit:
3 – 1L Bottles of OEM Transmission Fluid
2 – OEM Drain/Fill Plugs
**These clutch kits are built to order, and we cannot accept returns on this product**
Reviews
There are no reviews yet.