OVERVIEW
Factory flexible support for the assigned exhaust mount
6X0-253-147 is the Genuine VW/Audi exhaust hanger retaining ring for the assigned mounting positions below. The molded flexible support connects the original exhaust hanger points while allowing controlled system movement.
Exhaust systems use different supports at the center and rear sections. Match the complete part number and original bracket arrangement so the exhaust is supported at its intended height and clearance.
Technical details
- Complete factory number: 6X0-253-147.
- Factory specification: factory exhaust hanger retaining ring 6X0253147.
- Design: molded flexible retaining ring with mounting openings.
- Quantity supplied: one individual exhaust hanger.
This listing supplies one hanger. The metal bracket, retaining hardware, exhaust pipe and silencer are separate parts. Color and general shape alone do not establish interchangeability with a different exhaust support.
Common reasons to replace
- The hanger is split, torn or cracked.
- The mounting openings are stretched or damaged.
- The support has hardened and no longer accommodates normal movement.
- The original hanger is missing.
- Inspection confirms an incorrect support or improper exhaust position.
Inspect the remaining hangers, brackets and pipe alignment. Contact with the body or excessive exhaust movement can also come from a bent bracket or damaged mount elsewhere. A new retaining ring does not repair those components.
Vehicle fitment
Match the assigned hanger position, drivetrain and original number below. Nearby exhaust supports can use different part numbers.
| Vehicle | Model years | Engine | Configuration | Application restrictions |
|---|---|---|---|---|
| Volkswagen Jetta | 1993–1998 | 2.0L gasoline I4 or 2.8L gasoline VR6 | Mk3 sedan; front-wheel drive; Center exhaust mounting position | Original 6X0253147 center hanger position only; rear hanger and metal brackets are separate. |
| Audi TT | 2003 | 1.8L turbocharged gasoline I4 | 8N Coupe or Roadster; quattro; Assigned exhaust hanger position; PR 1X1 | Original 6X0253147 retaining ring only. Not every exhaust hanger; front-wheel-drive arrangement differs. |
| Audi TT | 2006 | 1.8L turbocharged gasoline I4 or 3.2L gasoline VR6 | 8N Coupe or Roadster; quattro; Assigned exhaust hanger position; PR 1X1 | Original 6X0253147 retaining ring only; identify the exact bracket and hanger position. |
Installation guidance
Allow the exhaust to cool and support it safely. Follow the factory exhaust mounting procedure, fit the hanger to the original mounting points and avoid stretching it with a misaligned pipe or bracket.
Check clearance to the body, heat shields and suspension throughout normal movement. Verify that the exhaust hangs without unwanted preload or contact.
Ordering information
Sold individually as one genuine hanger. Metal brackets, mounting hardware, pipes and silencers are separate. Confirm VIN, exact exhaust position and required quantity.