OVERVIEW
Genuine VW/Audi 7H0-972-501 is an individual negative/ground jump-start terminal for the matching original engine-compartment arrangement. It renews the assigned terminal connection point on the confirmed Touareg Hybrid profiles below.
Technical details and what is included
- Factory part number: 7H0-972-501 / 7H0972501.
- Component type: original jump-start ground terminal.
- Catalog polarity designation: negative/ground.
- Quantity supplied: one individual terminal.
- Positive jump point, protective caps, bracket, cables and battery are separate components.
The archive photo shows the individual terminal body. Match the original mounting and terminal profile before ordering. This component is separately specified from the positive jump-start socket and from the battery cable assembly. Do not use the part number to infer an electrical current rating or an alternate mounting location.
Common reasons to replace
- The original terminal body is physically damaged.
- Corrosion or damage at the assigned terminal prevents the required connection.
- The original terminal is missing from its factory mounting point.
- A diagnosed connection-point repair requires replacement of this terminal.
Inspect the mounting, associated cables and ground path separately. A loose bracket, defective cable or poor electrical connection elsewhere requires its own repair; replacing a terminal alone will not correct that cause. Identify the actual original circuit and connection point before choosing parts.
Vehicle fitment
The listed profiles require the original factory hybrid terminal arrangement. Match the installed component and mounting point before ordering.
| Vehicle | Model years | Engine | Configuration | Application restrictions |
|---|---|---|---|---|
| Volkswagen Touareg Hybrid | 2012, 2014 | 3.0L supercharged gasoline full hybrid V6 | 7P; factory hybrid propulsion; PR-0K1; Original eight-speed automatic; all-wheel drive | Original engine-compartment negative/ground jump-start terminal assigned 7H0972501. Match original mounting and terminal profile. One terminal supplied; positive jump point, caps, bracket, cables and battery are separate. |
| Volkswagen ID.4 | 2021–2023 | Battery electric drive | Original low-voltage battery negative/ground jump-start connection | Factory 7H0972501 negative/ground terminal at its assigned battery connection. Low-voltage system only; not a high-voltage connector or positive jump terminal. Match original mounting; one terminal supplied. |
| Audi Q4 Sportback e-tron | 2022 | Battery electric drive | Sportback; original low-voltage battery negative/ground jump-start connection | Factory 7H0972501 negative/ground terminal at its assigned battery connection. Low-voltage system only; not a high-voltage connector or positive jump terminal. Match original mounting; one terminal supplied. |
Installation and service guidance
Follow the factory electrical isolation and terminal-replacement procedure for the actual vehicle. Work on the assigned low-voltage connection only after the required vehicle-specific precautions and checks have been completed.
Inspect the receiving mounting and electrical contact surfaces, compare the replacement with the original and install it in the specified location. Use the separately specified mounting hardware and tightening procedure.
Confirm correct terminal retention and the repaired ground-path condition after assembly. Refit any separately specified protective parts, and complete the prescribed electrical verification.
For subsequent jump-start use, follow the vehicle owner's manual for approved connection points and sequence. Do not infer a jump-start method from this parts listing. Use the repair information for exact mounting, connection preparation and electrical test requirements.