OVERVIEW
Not available for sale or use in California.
Replace the spring-loaded PCV diaphragm with APR’s fixed-orifice design and a full catch-can system. The kit uses separate flow routes for off-boost and on-boost operation, preserving the factory crankcase and EVAP flow paths while separating oil in stages.
Technical Details
- One-way valves route vapors to the intake manifold off boost and the turbo inlet under boost. APR reported nearly twice factory crankcase vacuum at full boost in a Stage 1 Mk8 Golf R test.
- Billet 6061 aluminum and T304 stainless steel construction, with an anodized twist-off can, swivel fittings and PTFE-lined -10 AN hoses.
- Fluoroelastomer seals are rated to 430°F and designed for ethanol compatibility. APR does not require an ECU tune for the kit.
What’s Included
PCV top plate, catch can, connecting hoses and mounting hardware. The washer-fill-neck kit is sold separately and required on vehicles with the washer reservoir above the factory engine mount.
Fitment Sheet
| US vehicle | Application |
|---|---|
| Volkswagen Golf R and GTI (Mk8) | 2022–2024; confirm factory jet-pump-style PCV. |
| Volkswagen Arteon | 2022–2023 US examples; confirm the PCV and washer-reservoir arrangement. |
| Audi A3 and S3 (8Y) | 2022–2024; confirm factory jet-pump-style PCV. |
| Volkswagen Jetta GLI and Tiguan; Audi Q3 | Only builds with the revised factory jet-pump PCV. Confirm by VIN and part revision. |
Does not fit Atlas. The original engine cover does not fit with this kit. Oversized aftermarket ignition coils and some hood-latch-mounted struts may interfere.
Installation and Care
APR estimates about an hour for a DIY install. Follow APR’s routing and mounting instructions, and inspect and empty the can periodically. In cold weather, check it more often. Below freezing, follow APR’s winter-use guidance to prevent frozen condensate from restricting PCV flow.
APR installation PDF · APR specifications and winter-use notes.
Related Part
Washer-fill-neck kit (MS100199-A), required only on vehicles with the washer reservoir over the factory engine mount.
Contact HS Tuning to confirm stock and fitment.
