OVERVIEW
Genuine Driveshaft Flange Fastener
The N-019-926-1 Genuine VW/Audi bolt secures the propeller-shaft joint to its matching transmission or rear differential flange on the listed applications. Its socket head and long M8 shank provide the original fastening geometry for the specified flange connection. This listing supplies one bolt; the driveshaft, retaining plates and other hardware are separate.
Technical Details
- OEM part number: N-019-926-1.
- Catalog fastener size: M8 × 48 mm.
- Internal hexagon socket head.
- Locking fastener for the original driveshaft flange connection.
- Quantity supplied: one bolt.
The original archive photograph shows the socket drive, smooth shank and threaded end, including the visible locking patch. Match the full part number and the original flange hardware. A shorter bolt may not provide the intended thread engagement, while the wrong length can bottom out or interfere with the receiving assembly.
Common Reasons to Replace
- The socket drive is rounded and cannot be engaged securely.
- The bolt threads are stripped, cross-threaded or damaged.
- The bolt is missing after driveshaft or transmission work.
- Corrosion or previous removal has damaged the fastener.
- The workshop procedure requires replacement of the locking hardware after disassembly.
Driveline vibration, clunks and leakage can have several causes. Inspect the driveshaft joint, flange, retaining plates and surrounding components before treating a new bolt as the repair. A fastener cannot correct a worn joint, damaged flange threads, missing support or shaft imbalance.
Installation and Service Notes
Use the original bolt count and retaining-plate arrangement for the flange being serviced. Inspect the female threads, clean the mating surfaces as required and make sure the joint seats fully before tightening. Follow the application-specific tightening sequence and torque requirements. Do not assume a generic M8 tightening value, reuse rule or additional threadlocker specification.
Keep the tool fully seated in the socket to avoid damaging the head. Support the driveshaft during disassembly and preserve the alignment and handling requirements in the workshop procedure. Check the completed flange connection before returning the vehicle to service.
Vehicle Fitment
| Vehicle | Model years | Engine | Configuration | Application restrictions |
|---|---|---|---|---|
| Audi A4 | 1997–2001 | 1.8L turbocharged gasoline | B5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A4 | 1996–1997 | 2.8L 12-valve V6 gasoline | B5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A4 | 1998–2001 | 2.8L 30-valve V6 gasoline | B5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi S4 | 2000–2002 | 2.7L twin-turbocharged V6 gasoline | B5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A4 | 2002–2005 | 1.8L turbocharged gasoline | B6; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A4 | 2002–2005 | 3.0L 30-valve V6 gasoline | B6; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi S4 | 2004–2005 | 4.2L V8 gasoline | B6; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A4 | 2006–2008 | 2.0L turbocharged gasoline | B7; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A4 | 2006–2008 | 3.2L FSI V6 gasoline | B7; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi S4 | 2006–2008 | 4.2L V8 gasoline | B7; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi RS4 | 2007–2008 | 4.2L FSI V8 gasoline | B7; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A6 | 2000–2004 | 2.7L twin-turbocharged V6 gasoline | C5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A6 | 2000–2004 | 4.2L V8 gasoline | C5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A6 | 1998–2001 | 2.8L V6 gasoline | C5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A6 | 2002–2004 | 3.0L V6 gasoline | C5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi allroad | 2001–2005 | 2.7L twin-turbocharged V6 gasoline | C5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi allroad | 2004–2005 | 4.2L V8 gasoline | C5; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi S6 | 2002–2003 | 4.2L V8 gasoline | C5; Avant quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi RS6 | 2003 | 4.2L twin-turbocharged V8 gasoline | C5; sedan quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A6 | 2005–2009 | 3.2L FSI V6 gasoline | C6; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A6 | 2005–2011 | 4.2L V8 gasoline | C6; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi S6 | 2007–2011 | 5.2L FSI V10 gasoline | C6; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A8 | 1997–2002 | 4.2L V8 gasoline | D2; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi S8 | 2001–2003 | 4.2L V8 gasoline | D2; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A8 | 2004–2010 | 4.2L V8 gasoline | D3; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi A8 | 2005–2009 | 6.0L W12 gasoline | D3; A8 L quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Audi S8 | 2007–2009 | 5.2L FSI V10 gasoline | D3; quattro; Match original flange / fastening arrangement; not restricted by transmission in source | Original propeller-shaft CV flange attachment using M8 × 48 socket-head locking bolts; excludes front-wheel drive. Confirm original flange, retaining plate and bolt length by VIN. |
| Volkswagen Phaeton | 2004–2006 | 6.0L W12 gasoline | Sedan; 4Motion; Match original driveshaft flange | Original propeller-shaft flange requiring N-019-926-1. Confirm retaining plate and bolt length. |
| Audi A4 | 2004–2006 | 3.0L V6 gasoline | B6 Cabriolet; quattro; Match original driveshaft flange | Original propeller-shaft flange requiring N-019-926-1. Confirm retaining plate and bolt length. |
| Audi A4 | 2007, 2009 | 2.0L turbo gasoline | B7 Cabriolet; quattro; Match original driveshaft flange | Original propeller-shaft flange requiring N-019-926-1. Confirm retaining plate and bolt length. |
| Audi A4 | 2008–2009 | 3.2L FSI V6 gasoline | B7 Cabriolet; quattro; Match original driveshaft flange | Original propeller-shaft flange requiring N-019-926-1. Confirm retaining plate and bolt length. |
Ordering Notes
Confirm VIN, original flange, retaining plate and complete bolt number before ordering. The table covers the propeller-shaft flange application and does not assign this bolt to every axle or driveshaft joint in these vehicles. The gallery repeats the available original archive photograph with distinct metadata; seven images represent one bolt, not a seven-piece kit.
