OVERVIEW
Genuine body and interior attachment hardware
The N-090-298-5 Genuine VW/Audi panel screw is used at the original body and interior-trim fastening points specified in the fitment table. Verified applications include assigned door/interior-trim connections on the listed D2 A8 and S8 models and body cover/panel attachments on the specified D3 configurations.
The factory number identifies a small panel fastener. Match the exact connection and original receiver, because similar-looking screws in adjacent trim or cover positions can use a different thread profile or length.
Technical details
- Complete factory part number: N-090-298-5.
- Nominal factory specification: 4.2 × 13.
- Factory description: oval-head panel screw, combination design.
- Applications: assigned body and interior-trim attachment hardware.
- Quantity supplied: one screw.
The nominal dimensions describe the fastener specification rather than its shipping package. This is a panel screw rather than an M4 machine-thread bolt. Correct seating and retention depend on the intended mounting point, receiving thread or clip and original hardware arrangement.
Common reasons to replace
- A screw is missing after trim or body-cover service.
- The drive is damaged or rounded.
- The threaded profile no longer engages correctly.
- The screw is bent or its head no longer seats properly.
- A previous repair used incorrect substitute hardware.
Inspect the associated trim tab, cover mounting point and receiver during service. A new screw cannot repair a cracked panel, damaged mounting clip or stripped receiver. Investigate loose trim at all of its original attachment points rather than using extra torque to compensate for damaged parts.
Vehicle fitment
The table separates the verified D2 interior applications from the D3 body-cover applications. The stated PR A8U requirement applies to the specified D3 connection. Match the complete factory number and original screw position.
| Vehicle | Model years | Engine | Configuration | Application restrictions |
|---|---|---|---|---|
| Audi A8 | 1998 | 4.2L gasoline V8 | D2 sedan; quattro; original door/interior-trim attachment; 5-speed automatic | Assigned original interior/door-trim fastening screw, 4.2 × 13. Match original screw position and receiver. |
| Audi A8 | 2001 | 4.2L gasoline V8 | D2 sedan; quattro; original door/interior-trim attachment; 5-speed automatic | Assigned original interior/door-trim fastening screw, 4.2 × 13. Match original screw position and receiver. |
| Audi S8 | 2001 | 4.2L gasoline V8 | D2 sedan; quattro; original door/interior-trim attachment; 5-speed automatic | Assigned original interior/door-trim fastening screw, 4.2 × 13. Match original screw position and receiver. |
| Audi A8 | 2008–2009 | 4.2L gasoline V8 | D3 sedan; quattro; PR A8U original body cover/panel attachment; 6-speed Tiptronic automatic | Own-part PR A8U equipment requirement for assigned body cover/panel fastening location. Small screw only; body panels and covers not included. |
| Audi S8 | 2008–2009 | 5.2L gasoline V10 | D3 sedan; quattro; PR A8U original body cover/panel attachment; 6-speed Tiptronic automatic | Own-part PR A8U equipment requirement for assigned body cover/panel fastening location. Small screw only; body panels and covers not included. |
Installation guidance
Follow the factory removal and installation procedure for the particular trim or cover being serviced. Support and protect the component, keep the original hardware positions identified and inspect the mating attachment points before reassembly.
Align the component before starting the screw carefully in its intended receiver. Use the correct tool for the actual drive profile and apply the tightening instruction for the exact connection. Do not substitute a longer screw or increase torque to compensate for a damaged receiver.
After service, verify correct seating and retention of the trim or cover and restore all neighboring clips, seals and panels required by the procedure.
Ordering information
Supplied as one genuine screw. Trim panels, body panels, covers, receivers, clips and a complete hardware kit are not included. Confirm the repair quantity needed for the specific attachment points being serviced.