OVERVIEW
Genuine sun-visor attachment screw
The N-106-337-02 Genuine VW/Audi panel screw secures the assigned sun-visor mounting connection on the Q7 headlining equipment listed below. Its 4.8 × 19 factory specification must match the original receiving point.
The catalog assigns this screw to PR 6NS headlining equipment. Headlining, visor and clip arrangements can vary within the same model year, so confirm the equipment code and complete fastener number before ordering.
Technical details
- Complete factory number: N-106-337-02.
- Nominal factory specification: 4.8 × 19.
- Design: socket-head panel screw for the original clip or receiving point.
- Quantity supplied: one individual bolt.
The nominal specification describes the fastener itself rather than packaged shipping dimensions. Match the complete factory number, original attachment point and head seating arrangement. Similar-looking hardware elsewhere in the same assembly can differ in length, thread size or bearing surface.
Common reasons to replace
- A bolt is missing after component removal or previous service.
- The drive head is damaged or rounded.
- The threads have been crossed, stripped or otherwise damaged.
- The bolt is bent or its bearing surface no longer seats correctly.
- A previous repair used incorrect substitute hardware.
Inspect the visor mounting bracket, receiving clip and surrounding headlining during service. A replacement screw will not correct a cracked mount or stripped clip. A visor that droops or will not stay in position can have an internal hinge fault unrelated to mounting hardware.
Vehicle fitment
The listed rows require factory PR 6NS equipment and the original sun-visor attachment assigned this screw. The broader catalog section also contains safety-belt components; this listing does not identify the screw as a belt anchorage.
| Vehicle | Model years | Engine | Configuration | Application restrictions |
|---|---|---|---|---|
| Audi Q7 | 2007 | 3.6L FSI gasoline VR6 | 4L SUV; quattro; PR 6NS Alcantara molded headlining; Original sun-visor/headlining attachment | PR 6NS headlining equipment only; assigned 4.8×19 screw in sun-visor attachment. Confirm the original receiving clip. Not a seat-belt structural fastener. |
| Audi Q7 | 2007 | 4.2L FSI gasoline V8 | 4L SUV; quattro; PR 6NS Alcantara molded headlining; Original sun-visor/headlining attachment | PR 6NS headlining equipment only; assigned 4.8×19 screw in sun-visor attachment. Confirm the original receiving clip. Not a seat-belt structural fastener. |
| Audi Q7 | 2013–2015 | 3.0L supercharged gasoline V6 | 4L SUV; quattro; PR 6NS Alcantara molded headlining; Original sun-visor/headlining attachment | PR 6NS headlining equipment only; assigned 4.8×19 screw in sun-visor attachment. Confirm the original receiving clip. Not a seat-belt structural fastener. |
| Audi Q7 | 2013–2015 | 3.0L TDI diesel V6 | 4L SUV; quattro; PR 6NS Alcantara molded headlining; Original sun-visor/headlining attachment | PR 6NS headlining equipment only; assigned 4.8×19 screw in sun-visor attachment. Confirm the original receiving clip. Not a seat-belt structural fastener. |
Installation guidance
Follow the factory sun-visor removal and installation procedure. Protect the headlining and any illuminated-mirror wiring, align the mounting bracket and use the correct drive tool. Ensure the receiving clip is intact before tightening.
Align the mating components before engaging the bolt, start the threads carefully and use the correct tool for the actual drive. Follow the factory tightening instruction and sequence for the exact connection. Do not transfer torque values between different applications that happen to use the same bolt number.
Verify that the visor pivots and clips into position normally, the bracket seats evenly and any mirror lighting disturbed during service operates correctly. Avoid crushing trim by overtightening.
Ordering information
Supplied as one genuine screw. Sun visor, mounting bracket, clips, electrical connections, headlining and a complete hardware kit are not included.